I am Ming Ren, a Broker with RE/MAX Realtron.
The conclusion first: even if all you plan to do in your own backyard is set a few fence posts, plant a tree, or dig a garden bed, Ontario law treats you as an "excavator." The Ontario Underground Infrastructure Notification System Act, 2012 requires you to submit a locate request to Ontario One Call before you dig — the service is free — and to wait until every infrastructure owner that could be affected has responded, either by marking its facilities on the ground with written information, or by confirming in writing that it is not affected. Skip that step, and the cost of cutting a gas line, a power cable, or a fibre line is far beyond the few days of waiting you saved.
1. Why small backyard jobs count as excavation
Section 1 of the Act defines an excavator by conduct, not by job title: anyone who excavates, digs, drills, trenches, grades, or moves or breaks ground, soil, rock or other material — or who intends to do so — is an excavator. Professional contractors qualify; so does a homeowner with a shovel on a Saturday. Fence posts need holes, trees need pits, and pools, deck footings, and drainage work need no explanation. If your tools go below the surface, you are inside this statute.
More runs under a backyard than most people expect: natural gas, electricity, communications and fibre, water, and sewers can all pass beneath it, and not always at intuitive depths or along intuitive routes. In older neighbourhoods especially, what is buried often does not match what is visible above ground. "I know my own yard" is the most common starting point of these accidents. When I show homes, I tell buyers the same thing: if backyard work is in your future plans, note this rule now — it applies whether or not you hire a contractor.
2. How the request works, and how the timing runs
The process itself is simple. Before digging, submit a locate request to Ontario One Call identifying the work site and the planned work. Under the current rules, a standard request must be made at least five business days in advance, and not too early — generally no more than 30 days before the planned excavation date. Ontario One Call then notifies the infrastructure members who may be affected, and they complete the locate responses.
The operative word is "complete." Under section 6 of the Act, each member must either mark the location of its facilities and provide written information setting out that location, or confirm in writing that its facilities are not affected. You wait until every relevant member has responded and there is no conflict between the ground markings and the written information. If the gas utility has attended but the electric utility has not responded, starting early is not completing the process. Watch the validity period of the locates as well: if the work is delayed too long, a fresh request may be needed, and if markings are washed away or destroyed during the work, deal with the markings before digging further from memory.
The request and the locate responses are free: the Act prohibits Ontario One Call from charging an excavator for submitting a request, and members may not charge for their locate responses. Saving money is therefore never a reason to skip this step.
3. What happens if you hit something — and why it is not worth the gamble
Striking underground infrastructure has three layers of consequence. The first is safety: a gas leak or a live electrical cable can injure or kill; that is not a repair-bill question. The second is liability and cost: repair costs, service disruption, and the allocation of responsibility all turn heavily against the party who never requested locates. The third is delay: once something is hit, the work stops, investigation and repair queues take over, and a weekend project stretching into weeks is a common outcome.
The person who completed the process, by contrast, holds the request record, the markings, and the written locate information, and can show they dug carefully — avoiding marked areas and hand-digging near lines. A note for sellers: if you complete backyard work before listing, keep the locate request and construction records. When a buyer asks about underground services and whether the work was done properly, those documents are the most direct answer you can give.
One more detail that matters most on site: after the locates are in, slow right down near the markings. Markings show the approximate position of a facility; the closer you get to a marked line, the more the work should shift to hand-digging or other careful methods that expose and confirm the facility's actual position and depth before machinery moves in. If you do strike something despite all care, do not handle it yourself: for a gas line, stop work, leave the area, and follow the emergency procedure — call emergency services and notify the gas utility; for an electrical line, get people clear first and then report it. Preserve the time of the incident, site photos, and the locate documents you were working from; they matter for liability and insurance afterward. A scheduling note for owners: build the locate request in as the first step of the project timetable, not the day before digging. Responses need business days to assemble, and in the spring and rainy-season peaks you should leave extra room — planning roughly a week of buffer into the schedule makes the whole project run more smoothly, not less.
Three common misunderstandings
"It is only a few shallow holes — that is not excavation, and no request is needed." No. The Act defines the excavator by the activity, not by the depth of the hole. Fence posts and tree planting are squarely within it.
"I hired a contractor, so the request is the contractor's problem, not mine." Not entirely. Contractors usually submit the request, but the homeowner is responsible for confirming the request was actually made and all responses are in before work starts. Letting work begin unchecked leaves the owner in a poor position if something goes wrong.
"I requested locates last year and I remember the markings, so I can just dig." No. Locates have a validity period, and both the ground and the markings change. New digging needs a current, valid locate — not last year's marks and memory.
Action checklist
- When scheduling the work, count backwards: submit the locate request to Ontario One Call at least five business days ahead, and no more than 30 days before the planned dig date.
- Keep the request confirmation and check off each relevant member's response; confirm the ground markings match the written information.
- Dig only after all responses are in and there is no conflict; slow down near marked areas and hand-dig where needed.
- If the work slips beyond the locates' validity, or markings become unclear or are destroyed, re-request or reconfirm before digging further.
- After completion, keep the request record, locate documents, and construction photos with the home's files for a future sale.
Trust Professional, Diligent Work. I am Ming Ren. The yard is yours; what lies under it is not all yours. Completing the locate step before you dig is the most basic duty you owe your family, your neighbours, and your own wallet.
This article is general information only, not legal advice. Request categories, validity periods, and work requirements for a specific project follow Ontario One Call's rules in force at the time; consult an Ontario lawyer if a liability dispute arises.
Primary sources: Ontario Underground Infrastructure Notification System Act, 2012, S.O. 2012, c.4 (Ontario e-Laws, consulted November 2026); Ontario One Call (Ontario Dig Authority) current rules and guidance (consulted November 2026).


