I am Ming Ren, a Broker with RE/MAX Realtron.
The plain conclusion first: if your backyard sits next to a Toronto ravine, slope or woodland, check one thing before any work starts — whether your lot falls inside a protected area under Chapter 658 of the Toronto Municipal Code. Inside a protected area, you may not injure, destroy or remove any tree, place or dump fill or refuse, or alter the grade of the land without a permit. Note the two key points: any tree, of any species and any size; and the chapter controls more than trees — it controls soil and landform too. The source is Chapter 658 itself, checked against the City's current consolidated Municipal Code.
First: the protected area is drawn on a map, not by what your eye sees
Chapter 658 does not apply by feel — by how close your yard looks to a ravine. It defines the protected area as the shaded area on the maps in its schedules. The features it protects include ravines, tableland forests and the treed portion of the Lake Iroquois shoreline, and its definition of a ravine reaches the connected buffer areas and tree-canopy areas that contribute to the ravine's ecological function.
That produces two surprises. A lot that looks flat and ordinary, some distance from any slope edge, can still have part of it inside the shaded area. And a yard with a clear view of woodland is not automatically all inside the protected area either. A lot can be wholly or partly within it. So step one is always the map: use the City's lookup tools and confirm exactly where the line crosses your property, rather than relying on a contractor's experience. Do this at the buying stage, not the renovation stage — how much of the backyard the line covers directly limits what you can do with it later, and that belongs in your thinking before you offer, not after you close.
Second: what is controlled is much wider than cutting down a tree
Inside a protected area, the permit requirement covers three kinds of activity. The first is trees: no injuring, destroying or removing them. "Injure" reaches further than a saw — failing to protect a tree during construction to the City's tree protection standards can itself count as injury, even if you never touch a branch. The second is fill and refuse: no placing or dumping either. The chapter's definition of fill covers soil, sand, gravel and other material that can change the contour of the land, whether the material came from your own lot or was trucked in. Its definition of refuse includes leaves, branches and logs that did not fall naturally — so tipping your pruning clippings down the slope is, by definition, dumping. The third is grade: raising, lowering or otherwise altering the elevation and steepness of the land is controlled as well.
Keep this separate from the rule most people half-remember. Chapter 813, which governs ordinary private trees in Toronto, protects private trees above a diameter threshold — the source of the familiar "under 30 centimetres needs no application" idea. Inside a Chapter 658 protected area, a tree is a tree of any species and any size; there is no diameter threshold. Bringing ordinary-backyard habits into a ravine backyard is how the first mistake gets made.
| Comparison | Inside a Chapter 658 area | Ordinary private-tree rules (Chapter 813) |
|---|---|---|
| Tree threshold | Any species, any size | Diameter threshold for protected private trees |
| Land controlled? | Yes — fill, refuse and grade changes | Mainly trees |
| Check first | The shaded-area line on the schedule maps | Tree diameter and location |
Third: the exemptions are a narrow list — match them item by item
Section 658-4 lists activities that do not need a permit. The ones homeowners meet most often include removing a tree the City has determined to be dead, terminally diseased or imminently hazardous; pruning done to good arboricultural practice; fruit trees maintained for fruit production; and trees in special locations such as roof gardens and interior courtyards. On the fill side, exemptions include cultivating or turning over a garden bed without creating or changing a slope of more than 10 percent, and placing less than five cubic metres of fill to maintain an existing manicured area.
Two cautions in reading that list. Several exemptions carry a precondition — a dead or hazardous tree, for example, has to be determined to be so by the City's side; an owner cannot simply declare it. And the list is itemized: an activity that is not on it should not be stretched in by "close enough." The reliable route is to take your lot and your plans to the City's Urban Forestry office and ask, with a registered arborist's input where needed. A violation can cost more than a fine; the City can require the site to be restored, and fill that went down in a day can be expensive to put back to the original grade.
One more layer: a Chapter 658 permit is the City's layer. If the lot also falls within a Toronto and Region Conservation Authority regulated area, a TRCA approval may be needed as well. The two layers are separate; holding one does not mean holding the other.
Three common misunderstandings
One: "The tree is under 30 centimetres, so no application is needed." That threshold belongs to the ordinary private-tree rules. In a Chapter 658 protected area, size does not decide — location and the exemption list do.
Two: "It is my own yard's soil; moving it around is not fill." The definition of fill does not care where the material came from. Soil from the same lot counts, and levelling a slope with it can also be a grade alteration.
Three: "Tipping pruned branches back into the woods is just nature." Branches that did not fall naturally fall within the definition of refuse, and dumping them in a protected area needs a permit like anything else. In a ravine backyard, everyday gardening and a violation can be one definition apart.
If your backyard touches a ravine, I suggest this order
- Check the map first: confirm whether any part of the lot is inside a Chapter 658 protected area and where the line runs — before you offer, if you are buying.
- List the work item by item: which trees, how much soil, whether slope or elevation changes. "Tidy up the backyard" is not a description that can be checked.
- Match each item against the section 658-4 exemption list, including any precondition that the City must make a determination first.
- For anything that does not match, apply for the permit through Urban Forestry, show the protected-area line on your drawings, and build approval time into the schedule before booking contractors.
- Confirm the TRCA layer in parallel: whether the lot is in a regulated area, and what that process needs.
- Protect what stays during construction: fence retained trees to the City's standards, and haul brush and surplus soil away properly — never down the slope.
I am Ming Ren. A ravine backyard is one of Toronto's real pleasures, but its rules come first: map, then drawings, then shovels — in that order, never reversed.
This article is general information, not legal advice. Confirm the protected-area line, exemptions and permit requirements for a specific lot with the City of Toronto's Urban Forestry office, and consult a registered arborist, an engineer or a lawyer where needed.
Primary sources: Toronto Municipal Code, Chapter 658, Ravine and Natural Feature Protection, ss.658-1, 658-2, 658-4; City of Toronto tree and ravine permit application pages (reviewed November 2026).


