Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Commercial Real Estate & Leasing

Can You Take the Walk-In Cooler and the Shelving When You Move Out? Sort Into Three Baskets First, Then Read One Line of Your Lease

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Commercial Real Estate & Leasing · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: what you may take on move-out day is not decided by the landlord's say-so, and not by whether the item is bolted down. The order of analysis is this: read your lease first — where the lease speaks, it governs. Only where the lease is silent does the common law default apply, and under that default, equipment installed for your business — trade fixtures — is generally yours to remove, provided you remove it while you still hold the premises and you make good the damage. The Commercial Tenancies Act never uses the word "fixture" at all; there is no statute to look this up in. It is case law plus contract.

1. Sort everything into three baskets

The common law sorts the contents of a leased unit into three baskets, each treated differently:

Basket What it is Default treatment
Chattels Items never fixed to the building, resting on their own weight: rolling racks, tables and chairs, a free-standing freezer Always the tenant's; take them any time
Fixtures / leasehold improvements Items fixed to make the premises durably usable: partitions, ceilings, a built-in counter, altered plumbing and wiring Generally stay with the landlord; no default right to remove
Trade fixtures Items fixed to the premises but installed purely to carry on the tenant's business: a walk-in cooler, a professional oven, trade-specific machinery Removable by the tenant in principle, if removal causes no material damage and the tenant repairs what removal leaves behind

Which basket an item falls into is decided by the test running back to Stack v. T. Eaton (1902): the degree of annexation and the object of annexation — was it fixed to improve the land permanently, or to serve the tenant's trade? In the lease context there is a further presumption working for tenants: a tenant is not presumed to have intended a permanent gift to the land.

2. The default comes with three hard conditions

First, the window. The right of removal must be exercised while the tenant still holds the premises — in practice, before the term ends. Coming back after the keys are returned and the lease is over puts the right on very shaky ground. The saddest version I see is the tenant who settles the deposit and hands back the keys, and only then remembers the cooler.

Second, no material damage, and make good. Bolt holes, severed connections, and floor damage left by removal are the tenant's to repair. If taking an item out would materially damage the premises, that fact itself can take the item outside the removable category — courts assess exactly that, item by item.

Third, the lease can override all of it. This is the condition that decides the most cases. In Clemmer Steelcraft (2008), a spray booth that could have qualified as a trade fixture at common law stayed because the lease vested all leasehold improvements and fixtures in the landlord. The classification test only takes the field when the lease is silent. A sentence saying "all improvements and fixtures belong to the landlord at expiry," or the opposite kind — "the tenant shall remove its fixtures and restore the premises at its cost" — rewrites the ending. Note the second type: some leases do not ask whether you may remove; they order you to, at your expense, and bill you if the landlord has to do it.

3. Write the exit at signing, not at expiry

The cost structure of these disputes is absurd: the argument and the business interruption routinely cost more than the equipment. So work backwards. At signing, schedule the major equipment to the lease and state which items are the tenant's trade fixtures, removable at expiry, and to what repair standard. Photograph installations as they go in, including how items are fixed and the condition of walls and floors beforehand. On an assignment or an exit negotiation, price the equipment separately — equipment left for the landlord or the next tenant is an asset with a value, not a default gift.

An invented example, only to show the point: a coffee shop is moving out, and the landlord points at the counter fixed to the wall — "that is an improvement, it stays" — while the tenant says it is coffee equipment and goes. If the signing schedule listed that counter as a trade fixture, the argument ends in a minute. If it did not, the parties are into degree of annexation, object, and damage, item by item, and one counter can take months.

Three misunderstandings I hear most often

"If it is bolted down or plumbed in, it belongs to the landlord." No. Annexation is only half the test; the object of the annexation matters just as much. Equipment installed for a trade can be firmly fixed and still be a trade fixture. Both halves are always read together.

"The term ended and I returned the keys — I can come back next week and remove things just the same." You cannot count on it. The removal right travels with possession. Schedule every removal before expiry and before the formal hand-back.

"Improvements and trade fixtures are the same thing." They are not, and leases frequently use different ownership sentences for the two. Confusing fit-out work — counters, partitions, plumbing changes — with trade equipment like coolers and ovens is the single most common starting point of move-out disputes.

If your move-out is coming up, do these five things in order

  1. Read the fixtures, improvements, and restoration provisions of your lease first, sentence by sentence, before unbolting anything.
  2. List the unit's contents in the three baskets, against the signing schedule and your installation photos, and flag the contested items.
  3. For contested items, get the landlord's position in writing, including the repair standard — and if you cannot agree, involve a lawyer rather than creating a fait accompli by removing first.
  4. Complete removal before the term expires, repair afterwards, photograph the result, and do a written hand-over confirmation with the landlord.
  5. If equipment stays for the landlord or the next tenant, price it separately and record it in the hand-over documents. Do not let it vanish into the words "as is."

Trust Professional, Diligent Work. I am Ming Ren. Whether you can take it with you was largely written on signing day — pull the documents out and we will go through them item by item.


This article is general information only, not legal advice. Classification of a specific item turns on how it was affixed, its purpose, and the lease wording. Consult an Ontario lawyer before acting.

Primary sources: Stack v. T. Eaton Co. (1902), 4 O.L.R. 335 (degree and object of annexation); Clemmer Steelcraft Technologies Inc. v. Bangor Metals Corp., 2008 CanLII 46320 (ON S.C.) (lease wording displaces the common law default); Ontario Court of Appeal case summaries citing the Starmark line of authority (removal conditional on no material damage); Commercial Tenancies Act, R.S.O. 1990, c. L.7 (Ontario e-Laws, consulted November 2026 — the Act contains no provisions on fixtures). The coffee shop example is illustrative, not a real transaction.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation