Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Buying a Home

Why Does the Same House Have Two Different Sizes? Start With What MPAC Actually Measures

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Buying a Home · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: when the size on a listing and the size in MPAC's records do not match, that is common, and it does not mean one side made the number up. The two figures are usually measuring different things, from different places. MPAC's number exists for assessment and taxation. It is taken from the outside of the exterior walls and covers the above-grade living portion of the home. The number you get with a tape measure inside is the clear space within the walls. Compare those two directly and you will only confuse yourself.

Before you buy, sell, or work out a price per square foot, sort out the three things below and one size figure will stop leading you around.

1. MPAC measures from outside the house

MPAC is the body that assesses property in Ontario. It records a home's size for assessment purposes — not to help you plan furniture or a renovation. Its approach is to calculate the above-grade living area using the outside dimensions of the exterior walls. In other words, it measures the area enclosed by the home's outer outline, and the band taken up by the walls themselves sits inside that figure.

The practical result: for the same home, MPAC's figure will usually come out larger than the net interior space you measure room by room, because one includes the walls and the other does not. This is not an error; it is a different definition. The question clients ask me most is, "Ming, I measured it myself and it is not that big — is the number wrong?" Most of the time it is not wrong. You measured inside the walls; MPAC measured outside them.

So before deciding a size is wrong, ask one question first: were these two numbers produced with the same ruler?

2. The basement and the garage are not in that number

MPAC's living-area figure is about the above-grade living portion of the home. A basement — even a finished one that people live in — is generally not folded into that above-grade figure. A garage is not living area either, whether it is attached to the house or detached.

This is where people most often misjudge how "big" a house feels. An example, with illustrative numbers only, not a real listing: suppose MPAC records 1,800 square feet, and the home also has a finished basement of about 700 square feet and a double garage of about 400 square feet (all illustrative numbers). Walk through it and the place feels like well over two thousand square feet — yet the paper figure is 1,800, because the space you are feeling is exactly the space this definition leaves out.

Part of the home In MPAC's above-grade living area? Note
Above-grade living rooms, bedrooms, kitchen Yes Calculated from outside exterior-wall dimensions
Finished basement Generally no Treated separately, not added to the above-grade figure
Garage No A garage is not living area
Clear space inside the interior walls A different measure This is your own tape-measure figure — not the same ruler

When you view a home, I suggest keeping two separate accounts. One is the above-grade area on paper, which is what you use to compare price against similar homes. The other is the extra space — basement, garage — which is what you use to judge whether the home works for your family. Merge them into one total and every comparison goes wrong.

3. A listing size does not always come from MPAC

Many people assume the size on a listing is MPAC's number. It may not be. A listing size can come from several places: MPAC's assessment records, a builder's plans, or a separate measurement or figure supplied by the seller or the listing side. Different sources can mean different definitions, and different definitions produce different numbers.

So when you see a size, do not simply trust it and do not simply dismiss it — ask where it came from. Where the source is stated, when it was measured, and whether it includes the basement: settle those three points and the number starts to mean something. This matters most when you divide price by size to get a price per square foot and compare it with a sale down the street. If the definitions differ, the conclusion is wrong — and wrong in a way that looks convincing.

If you own the home and want to check MPAC's record, AboutMyProperty lets owners view the property information MPAC holds, such as size, year built and room counts. If the record genuinely looks off, you can ask MPAC to look at it again through a Request for Reconsideration. Use the process and the deadline for that year as MPAC publishes them and as shown on your own notice — do not rely on a date in an old article.

Three common misunderstandings

Misunderstanding 1: "The sizes don't match, so the seller must be inflating the number." Do not jump there. Exterior-wall measurement, a basement left out, and a listing figure from a different source can each open a real gap between two numbers. Check the definition first, then talk about right and wrong.

Misunderstanding 2: "A nicely finished basement can be added into the size when we sell." A finished basement has real value and buyers do pay attention to it. But it does not enter MPAC's above-grade living-area figure. Its value shows up in offers and negotiation, not in making the paper size bigger.

Misunderstanding 3: "A bigger size means a lower price per square foot, so the home is a better deal." Price per square foot is total price divided by size. Change the definition of the denominator and the result changes. Dividing by a total that includes the basement, versus dividing by above-grade area alone, gives two completely different figures — and neither can be compared across homes unless the same definition is used throughout.

If you actually need to verify a size, do it in this order

  1. Ask where the listing size came from — MPAC records, builder's plans, or a separate measurement — and write the source down, not just the number.
  2. If you are the owner, pull up your property on AboutMyProperty and compare MPAC's recorded size, year built and room counts against the listing, item by item.
  3. Compare definitions before you compare numbers: measured from the exterior walls or not, basement and garage in or out. Align the definitions, then look at the size of the gap.
  4. At the viewing, note the basement and garage on their own merits as a bonus, and keep them out of the above-grade figure when you work out price per square foot.
  5. If MPAC's record is clearly off, keep your plans and measurement records together first, then file a Request for Reconsideration the way MPAC publishes, and note that year's deadline.
  6. If size will decide your offer, have the home measured professionally once, on one consistent definition, instead of deciding by feel.

老老实实做人,踏踏实实做事 — be honest in how you deal with people, and solid in how you do the work. I am Ming Ren. Square footage looks like a small number, but behind it sit two or three different rulers. Work out which ruler you are holding first, then talk about whether the price is fair. That is the right order for looking at a home.


This article is general information, not legal advice, and it does not confirm the size or assessed value of any specific property. For a specific property, MPAC's official record and published procedures govern; verify them yourself or consult a professional before acting.

Primary sources: Municipal Property Assessment Corporation (MPAC), official site mpac.ca, on property assessment and property information, and the AboutMyProperty owner service (consulted November 2026). The figures 1,800, 700 and 400 square feet are illustrative numbers, not data from a real listing.

Frequently asked questions

If the sizes don't match, is the seller inflating the number?

Do not jump there. Exterior-wall measurement, a basement left out, and a listing figure from a different source can each open a real gap between two numbers; check the definition first, then talk about right and wrong.

Can a nicely finished basement be added into the size when selling?

A finished basement has real value and buyers do pay attention to it, but it does not enter MPAC's above-grade living-area figure. Its value shows up in offers and negotiation, not in making the paper size bigger.

Does a bigger size mean a lower price per square foot and a better deal?

Price per square foot is total price divided by size, and changing the definition of the denominator changes the result. Dividing by a total that includes the basement versus above-grade area alone gives two completely different figures that cannot be compared across homes unless the same definition is used throughout.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation