I am Ming Ren, a Broker with RE/MAX Realtron.
The plain version first: when the measured size comes in below the listing figure, do not start with "how much can I claim." Start with two questions — is the gap proven by a proper professional measurement, and where exactly are you in the transaction? Ontario law contains no single percentage line at which a contract automatically unwinds. The routes open to you depend entirely on timing: still in the conditional period, already firm, or already closed. This article walks through the three stages separately.
Why listing sizes are so often off
Understanding where the number came from keeps you from treating every gap as a deception. Listing square footage has mixed sources:
- MPAC data: The above-grade living area used for tax assessment. It typically excludes basements and garages, and MPAC's records can be years out of date (you can look up your own property's data on MPAC's site).
- Builder plans: Common on new homes, measured to the outside face of exterior walls — "sellable" area, inherently larger than usable interior space.
- Seller- or agent-supplied figures: Drawn from old documents, estimates or recycled listings, of uneven reliability.
- Professional measurement: A third-party service measuring to a published standard (such as ANSI) — the most consistent of the sources.
The same home legitimately measures differently under different conventions; that is normal, not exceptional. Note also that the standard Agreement of Purchase and Sale contains no clause guaranteeing square footage, and listing materials commonly carry the word "approximate." That does not make size a free-for-all: registrants are regulated under TRESA and by RECO and must not make false or misleading statements. A figure the writer knew was wrong — or never bothered to verify — can ground a complaint and, depending on the evidence, a claim. But there is no percentage formula; outcomes turn on proof and the facts of the case.
Stage by stage: where did you find it?
| Stage | Your position | The realistic routes |
|---|---|---|
| Conditional period (inspection and other conditions still open) | Maximum leverage | Negotiate a price change on the strength of a measurement report; if refused, decline to waive the condition and exit under the contract, with the deposit handled as the contract provides |
| Firm, not yet closed | The contract binds you | Lawyer reviews the wording; negotiate by letter; never simply refuse to close |
| After closing | Minimum leverage | RECO complaint about the registrant; legal advice on a misrepresentation claim; ask MPAC to correct its recorded data |
The conditional period is the golden window, which is why I recommend measuring during it. A home inspector normally records room dimensions but does not produce a formal measurement report; if size matters, commission a professional measurement with a stated standard and floor plans. Take that report, put your request (a price adjustment or other arrangement) in writing through your agent, and do not waive your conditions until it is resolved.
Once the deal is firm, the contract governs. The correct move is to have your real estate lawyer read the APS and every schedule, find exactly where the size figure appears and in what words, and negotiate through the lawyers. The dangerous move is refusing to close in frustration: closing is your obligation unless a legal basis says otherwise, and a wrongful refusal puts your deposit — and the seller's losses — at risk.
After closing, the routes narrow. A RECO complaint addresses the registrant's conduct; RECO can investigate and discipline, but it does not award you compensation. Compensation runs through negotiation or a civil claim for misrepresentation, which requires proving the statement was false, that you relied on it, and that you suffered loss — with real cost and uncertainty, so get a legal assessment first. One practical side step: give the measurement report to MPAC and ask it to correct its records; a smaller recorded area can also correct the basis of future property tax.
Three misunderstandings I hear most often
"Past a certain percentage, the contract is automatically void." There is no such statutory threshold in Ontario. Percentages circulating online are not law. The size of the gap is one factor in negotiation and in a case-by-case legal assessment — it is not a switch that cancels a deal.
"The listing said 'approximate,' so the seller and agent are fully protected." "Approximate" allows room for honest measurement differences. It is not a licence to publish a number the writer knew, or had reason to know, was wrong. Where the figure came from, and what the writer knew, matter more than the gap alone.
"I'll just measure it myself with a tape." A self-measurement carries no weight in a negotiation or a proceeding. What carries weight is a third-party written report, measured to a published standard, with drawings and an identified measurer — something the other side cannot wave away with "different method."
If the size does not match, do these in order
- Fix the evidence first: commission a professional measurement to a stated standard, in writing, and keep the original listing material showing the figure.
- Establish your stage: how many days remain on your conditions, and whether the deal is already firm. Read the calendar before choosing a strategy.
- In the conditional period: put your request in writing through your agent, with a clear response deadline, and do not waive conditions before it is settled.
- If firm or closed: have your lawyer review the contract and the evidence before you act — and in no case refuse to close unilaterally.
- If you believe the registrant published a figure they knew or should have known was wrong, assemble the documents and complain to RECO — as a track separate from any claim for compensation.
Trust Professional, Diligent Work. I am Ming Ren. On size, one professional measurement during the inspection window is among the cheapest insurance in the whole purchase — while that window is open, everything is negotiable.
This article is general information only, not legal advice. Outcomes in a size dispute turn on contract wording, evidence and the facts of the case; have your Ontario real estate lawyer review the complete file before acting.
Primary sources: Trust in Real Estate Services Act, 2002 and RECO guidance on registrant statements and conduct (reco.on.ca); MPAC property data information (mpac.ca) (consulted November 2026).
Frequently asked questions
Past a certain percentage difference, is the contract automatically void?
There is no such statutory threshold in Ontario, and percentages circulating online are not law. The size of the gap is one factor in negotiation and in a case-by-case legal assessment — it is not a switch that cancels a deal.
The listing said approximate, so are the seller and agent fully protected?
Approximate allows room for honest measurement differences; it is not a licence to publish a number the writer knew, or had reason to know, was wrong. Where the figure came from, and what the writer knew, matter more than the gap alone.
Can I just measure it myself with a tape?
A self-measurement carries no weight in a negotiation or a proceeding. What carries weight is a third-party written report, measured to a published standard, with drawings and an identified measurer.


