Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Mortgages & Finance

Put 20% Down and Got a Higher Rate? Canada's Three-Tier Mortgage Pricing, Explained

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Mortgages & Finance · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The conclusion first: in Canada, the direction of your mortgage rate is driven less by how much you put down or how solid you look, and more by whether your loan can be covered by mortgage default insurance. Loans fall into three tiers — insured, insurable, and uninsurable. The first two carry an insurer's backing, which lowers the lender's funding cost and usually produces a lower rate. The third carries no insurance at all; the lender holds the whole risk, and pricing is usually higher. That is how the counterintuitive result happens: on the same home, the buyer who put 20% down can be quoted more than the buyer who put 10% down.

I am a real estate broker, not a mortgage broker. This article explains the mechanism and the direction of pricing only — it quotes no current rates, because rates move daily. Your actual quote belongs to a licensed mortgage professional.

First: work out which tier your loan falls into

Tier What it is Who pays the premium
Insured Down payment under 20%; default insurance is mandatory, provided by CMHC, Sagen, or Canada Guaranty The borrower — usually added to the loan
Insurable Down payment of 20% or more; insurance is not mandatory, but the loan meets the conditions for the lender to insure it in bulk (portfolio insurance) The lender — you never see this cost, but you benefit from the lower pricing direction
Uninsurable The loan fails at least one eligibility line, so no insurance can cover it No premium — and no insurance; the lender carries all the risk, and pricing is usually the highest of the three

Why does insurance lower pricing? On an insured loan, if the borrower defaults, the insurer compensates the lender. The lender's credit risk and funding costs drop sharply, and such loans can be pooled into securities and funded cheaply. On an uninsurable loan, the risk sits entirely on the lender's own books, and that cost shows up in the rate. So the operative question is never just "how much did I put down" — it is "which tier does this loan land in."

Second: the two property-value lines sit in different places — this is the trap

Effective December 15, 2024, the Department of Finance raised the high-ratio insurable property-value cap from $1 million to $1.5 million. The low-ratio cap did not move with it — it remains $1 million. With the two lines apart, the puzzling combination appears:

Situation (owner-occupied purchase) Tier
Price under $1.5 million, down payment under 20% Insured — eligible, borrower pays the premium
Price under $1 million, 20% or more down, amortization of 25 years or less Insurable — the lender can bulk-insure it; pricing direction is lower
Price at or above $1 million, 20% or more down Uninsurable — past the low-ratio line, it cannot be insured

An illustrative scenario with numbers I made up: a $1.18 million home you live in, with 20% down. Because the price crosses the $1 million low-ratio line, that loan is uninsurable. The same home, if the rules let you put less than 20% down, could instead be insured. Paying more down does not guarantee cheaper pricing — what matters is which side of the line the loan lands on.

Other common ways a loan lands in the uninsurable tier: choosing a 30-year amortization (the exception is an insured loan for a first-time buyer or a newly built home, where 30 years is permitted); buying a non-owner-occupied rental property; and refinancing — a refinance is simply outside the insurable categories. One failed condition is enough to move the whole loan into the third tier.

Third: before comparing rates, compare total cost

Your tier steers the rate direction, but a sound decision never rests on the rate alone. Compare three things together: the rate, the insurance premium if there is one, and the total interest over the life you actually expect to hold the loan.

  • Under 20% down (insured): lower pricing direction, but you pay a default insurance premium, and once it is added to the loan you pay interest on it too.
  • 20% down and insurable: no borrower premium and the lower pricing direction — the combination many buyers assume is automatic. It is, only if price, amortization, and use all stay inside the lines.
  • Uninsurable: no premium, but the higher pricing direction, and the more you borrow and the longer you amortize, the more that gap compounds.

So my advice is mechanical: before you make an offer, have a licensed mortgage broker determine which tier your exact combination — price, down payment, amortization, use — lands in, and then compare the total cost of two or three down-payment structures. Discovering the tier after the offer is signed leaves you almost no room to restructure.

Three common misunderstandings

1. "The more I put down, the lower my rate must be." Not necessarily. Your down payment sets how much you borrow and whether you pay a high-ratio premium. The pricing direction is set by the tier. Past the $1 million line, a 20%-down loan can sit in the most expensive tier of the three.

2. "With the cap now at $1.5 million, any home can be insured." It cannot. The $1.5 million line is for high-ratio loans (under 20% down). The low-ratio insurable cap is still $1 million, and at $1.5 million or more, no down payment makes a loan eligible for default insurance.

3. "A 30-year amortization is cheaper because the payment is lower." The payment is lower. But outside the insured first-time-buyer and new-build exceptions, a 30-year amortization generally pushes the loan into the uninsurable tier at a higher pricing direction, and a longer amortization means more total interest regardless. The payment saving has to be weighed against both.

Before you make an offer, do these in order

  1. Determine the tier first: lay out the price, down payment, amortization, and use, and have your mortgage broker state plainly whether the loan is insured, insurable, or uninsurable.
  2. If the price sits near $1 million, run the extra step: a small move across that line can change the tier and the pricing direction entirely — compare two down-payment structures.
  3. Put the rate, the premium, and the total interest on one page and compare total cost — never the rate alone, and never the payment alone.
  4. If you want a 30-year amortization, confirm whether it changes your tier before deciding the lower payment is worth it.
  5. Rules change: the value caps and amortization policies were adjusted recently. Before signing, rely on the current Department of Finance and CMHC wording and your broker's current calculation, not on numbers you remember.

I am Ming Ren. Before you buy, find out which tier your loan lands in, and we will compare the total cost line by line.


This article is general information, not financial or legal advice. Insurance eligibility thresholds change with regulation. Consult a licensed mortgage professional before acting.

Primary sources: Department of Finance Canada mortgage insurance eligibility regulations (Insurable Housing Loan Regulations and Eligible Mortgage Loan Regulations, amendments effective December 15, 2024: high-ratio insured property value must be under $1,500,000; low-ratio insurable value must be under $1,000,000; maximum amortization 25 years, extendable to 30 years for first-time buyers or newly built homes); CMHC homeowner mortgage loan insurance requirements (minimum down payment of 5% of the first $500,000 and 10% of the portion above) (consulted November 2026). The $1.18 million figure is illustrative, not a real case; this article contains no current rate figures.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation