Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Commercial Real Estate & Leasing

Changing a Commercial Use: A Clean Building File Does Not Mean the Fire Code Is Satisfied

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Commercial Real Estate & Leasing · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: an Ontario commercial building answers to two safety systems at once, and neither vouches for the other. The building department's system looks at the moment you make a change. The fire system looks at how the building is used today, every day. A building that was lawfully built and carries a spotless permit history can change use and immediately face a fire retrofit order. Discovering that bill after signing is the most common source of blown budgets in commercial conversions.

Before signing, separate three questions: what each system actually governs, what triggers the Fire Code's retrofit rules, and why a permit may be required even when no construction is planned.

1. Two statutes, two clocks

System Legal basis Enforced by When it applies
Building Code system Building Code Act, 1992 and the Ontario Building Code (now O. Reg. 163/24) Municipal building department When you apply to build, renovate or change a use; judged against the code of that moment
Fire Code system Fire Protection and Prevention Act, 1997 and the Ontario Fire Code (O. Reg. 213/07) Local fire service Continuously, to existing buildings; the owner carries an ongoing duty of compliance, and inspectors may inspect and issue orders

In short: a building permit is a snapshot — approved, filed, done. The Fire Code is an always-on obligation, and a building's age earns it no exemption from the requirements of the use it houses today. A due-diligence search that only pulls the building permit file will never even see the fire side of the ledger.

2. Part 9 retrofits follow the use, not the vintage

Part 9 of the Ontario Fire Code is titled "Retrofit," and it does what the name says: it reaches into existing buildings and imposes minimum life-safety standards organized by occupancy type. Assembly, residential, business and personal services, mercantile and industrial occupancies each have their own section, addressing matters such as fire separations, the number and width of exits, fire alarm and suppression requirements — the specifics always turn on the current text and the classification of the case.

The trigger is the point buyers miss. What decides which retrofit section applies is what the building is used for now — not the year it was built. Office to restaurant, retail to fitness studio, warehouse to a public-facing use: once the occupancy classification changes, the new section's requirements can land on the space in full. Separations and exits that were perfectly compliant for the old use may fall short for the new one. And this cost is not part of the contractor's fit-out quote; it is a compliance obligation that should be estimated separately, before signing, and allocated expressly in the purchase or lease documents.

In practice, the inspection that surfaces all this is rarely one you schedule. It arrives with a new tenant's business licence, an insurer's review, or a complaint — and the inspector measures the building against today's use, with no discount for "the last tenant did it this way." Orders carry deadlines, and the remedial work itself usually needs building permits, so both systems end up running at once. That is why experienced buyers commission a fire code review before closing: a modest consulting fee buys you the order list in advance, while you can still negotiate over it.

3. No construction does not mean no permit

Section 10 of the Building Code Act provides that where the use of a building or part of a building is changed in a way that would increase the hazard, as determined under the Building Code, a permit from the chief building official is required — even though no construction is proposed. This is the trap: the legal question is whether the hazard increased, not whether you picked up a hammer. Some municipalities, Toronto among them, are stricter still in practice on change-of-use permits, so confirm with the building department in writing in every case.

The complete sequence, then, is: classify the old and new occupancies; confirm whether a section 10 permit is triggered; review the applicable Part 9 retrofit section of the Fire Code; and merge both work lists into one cost and one schedule. Miss any one of the three lines and the budget is fiction.

Three misunderstandings I hear most often

"The building was legally built, so it is legal." Building compliance is a conclusion about a moment in time. Fire compliance is a continuing duty. Passing inspection the year the building went up says nothing about whether today's use passes today.

"We are not doing any construction, so no permit is needed." Section 10 turns on increased hazard, not on construction. A change of use alone can trigger the permit.

"Fire retrofits are the tenant's problem, not the owner's." Under the Fire Code the owner carries the compliance duty. Who ultimately pays can be allocated by contract — but that allocation has to be written, and it does not move the duty owed to the fire department.

Before you sign, do these five things in order

  1. Classify both the existing and the proposed occupancy precisely. Every later answer depends on this; get it wrong and everything downstream is wrong.
  2. Get written confirmation from the municipal building department: is a section 10 change-of-use permit triggered, and what drawings and reviews are required?
  3. Review the applicable Part 9 section of the Fire Code for the new use, and have a fire protection or code consultant produce the retrofit list.
  4. Convert the list into money and time, and put both into the negotiation and the transaction timetable — not after an order arrives.
  5. State expressly in the purchase or lease documents who bears the retrofit work and its cost, and have both an Ontario lawyer and a code consultant review before signing.

Trust Professional, Diligent Work. I am Ming Ren. On a change-of-use property, price the fire work first and negotiate second — reverse the order, and the savings usually come back at double.


This article is general information only, not legal or engineering advice. Occupancy classification and retrofit requirements turn on case-specific facts and municipal interpretation. Consult an Ontario lawyer and a fire or code consultant before signing.

Primary sources: Fire Protection and Prevention Act, 1997; Ontario Fire Code, O. Reg. 213/07, Part 9; Building Code Act, 1992, S.O. 1992, s.10; Ontario Building Code, O. Reg. 163/24 (Ontario e-Laws, consulted November 2026). No illustrative figures are used in this article.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation