Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Commercial Real Estate & Leasing

'Commercial' Does Not Mean Any Business Is Allowed: Check Zoning and Permitted Uses First

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Commercial Real Estate & Leasing · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: 'commercial property' is a loose label, not a permit. Whether your business may legally operate at an address depends on the parcel's zone category, whether your use appears on that zone's permitted-use list, and any site-specific exception that applies to the lot. Check zoning before you negotiate price or plan a buildout. Signing first and discovering the use is not permitted is the most avoidable loss in commercial site selection.

1. Start with the parcel's zone

In Ontario, section 34 of the Planning Act authorizes municipalities to pass zoning by-laws that govern what each parcel may be used for and what built standards apply. The municipal Official Plan sets the broad direction; the zoning by-law is the day-to-day rulebook for each lot. In Toronto, the current by-law is Zoning By-law 569-2013, with distinct categories — commercial, commercial-residential, commercial-residential-employment, employment-industrial and others — each carrying its own list of permitted uses.

The check is concrete: take the exact address, confirm the zone code, overlays and any holding provision through the City's zoning maps and lookup tools, then read the corresponding chapter of the by-law. Note that some Toronto lands are still governed by pre-amalgamation by-laws, so do not assume 569-2013 decides every address. A seller's or landlord's statement that 'a restaurant has always operated here' is not a substitute: a past use may not have been lawful, and even a lawful past use does not make your new use lawful.

2. Match your use, word for word, against the list

Once the zone is known, compare your business use — using the by-law's own defined terms — against that zone's permitted uses. A restaurant, a retail store, an office, a medical office, warehousing and light industry are separate defined uses with separate treatment. Some are permitted outright, some only with conditions such as a floor-area cap or a ground-floor limit, and some are not on the list at all.

A common pattern: an employment-industrial zone lists manufacturing, warehousing, wholesaling and related services as its core, while eating establishments and retail are often conditional, area-limited, or required to be associated with a manufacturing use on the same lot. Cheap rent in such a zone is no bargain for a stand-alone restaurant or shop that was never permitted there. A commercial-residential-employment zone usually carries a much longer list — but 'usually' is not a check. Match the actual use, every time.

Where your use stands What it means Next step
Permitted as-of-right No planning approval is needed for the use itself Still verify parking, signage, licensing and building requirements
Permitted with conditions Allowed only if area, floor, separation or other conditions are met Test every condition against your actual operating plan
Not on the list The use is not currently permitted Assess a minor variance or a rezoning — or choose another property

Zoning governs more than use. Parking and loading counts, permitted floor area, height and setbacks all shape what you can do. A change of use that raises parking demand, or a planned expansion, can fail on those standards even when the use itself is listed. Verify use, parking, density and exceptions together, in one pass.

3. Employment lands need an extra layer — and a non-conforming use has two formal routes

Provincial planning policy and municipal official plans designate certain lands as employment lands (areas of employment) to protect manufacturing, warehousing, office and other job-creating uses from being displaced by residential or stand-alone retail development. On such lands, residential uses are generally not permitted and retail is often restricted. Converting employment land to a non-employment use generally requires an official-plan-level review; it is not solved by simply changing tenants. If you are eyeing inexpensive employment land for a non-employment business, establish the feasibility and timeline of conversion before you discuss price.

If a use does not fit, there are two formal routes, and they are not interchangeable:

  • Minor variance: an application to the Committee of Adjustment under section 45 of the Planning Act for a minor departure from the by-law. Suitable only where the departure is genuinely minor and the statutory tests can be met. Faster, but never guaranteed.
  • Rezoning: an application under section 34 to amend the zoning itself. Appropriate for a substantive change of use; a longer public process with an uncertain outcome, measured in months or longer.

Assess both routes before a contract locks you in. The practical protection is a condition in your offer or lease: confirmation, during the conditional period, that the zoning permits your use with compliant parking — verified with the municipality in writing before you waive.

Common misunderstandings

1. "The listing says commercial, so any business works." No. A listing description is not a legal instrument. The by-law's list decides.

2. "The last tenant ran a restaurant here, so I can too." Not necessarily. Confirm whether that use was lawful, whether any legal non-conforming status exists, and whether it survives a change of operator, an expansion or alterations.

3. "I'll fit out first and sort out approvals later." That reverses the safe order. Money spent on rent and construction before approval is money at risk if the application fails.

4. "Employment land is cheap — I'll buy it and convert it to residential." Do not price that as a plan. Conversion faces provincial and municipal policy tests, with timing and outcome outside your control.

If you are looking at a commercial property now, do this in order

  1. Look up the exact address: zone code, Official Plan designation, exceptions, holding provisions and any former by-law still in force — and keep the results on file.
  2. Match your use, in the by-law's defined terms, against the permitted-use list, and test parking, loading, floor area and height against your plan.
  3. For employment lands, separately confirm the conversion policy and whether your use is permitted within the employment designation, not just the zone line.
  4. Put zoning and use confirmation in the offer or lease as a condition, and obtain written confirmation from the municipality during the conditional period, with a planner or lawyer advising where needed.
  5. If the use does not fit, price the time, cost and odds of a minor variance versus a rezoning before deciding to proceed, renegotiate or walk away — never after signing.

— Ming Ren, Broker, RE/MAX Realtron


This article is general information only, not legal or planning advice. Every municipality's by-law and every parcel's exceptions differ; consult an Ontario lawyer or professional planner and rely on written municipal confirmation before you act.

Primary sources: Planning Act, R.S.O. 1990, c. P.13, s.34 (zoning by-laws) and s.45 (minor variances), Ontario e-Laws, and City of Toronto Zoning By-law 569-2013 (both reviewed November 2026). For properties outside Toronto, check the local zoning by-law.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation