Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Commercial Real Estate & Leasing

Buying Commercial Land? Phase One Finds the Clues, Phase Two Gets the Evidence

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Commercial Real Estate & Leasing · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The short version: on a commercial or industrial purchase, an environmental site assessment is not paperwork for its own sake. It is how you keep a cleanup bill that can exceed the value of the building on the far side of closing. Ontario's system works in two steps. Phase One investigates without digging: records, a site visit, and interviews, to decide whether there are contamination concerns worth worrying about. Phase Two actually drills and tests, turning suspicion into measured fact — whether standards are exceeded, and by how much. And one hard rule to know up front: if you are buying land to change it to a more sensitive use — industrial to residential is the classic case — the Environmental Protection Act and O. Reg. 153/04 require a Record of Site Condition (RSC) to be filed in the Environmental Site Registry before that change of use. That is not optional.

First: Phase One looks for clues, and its output is PCAs and APECs

Under the O. Reg. 153/04 framework, a Phase One ESA is conducted by or under the supervision of a qualified person (a QP — typically a professional engineer or professional geoscientist). It covers a review of historical records for the property and the surrounding study area (past uses, the chain of title, aerial photographs, fire insurance and regulatory records), a site reconnaissance, and interviews, all documented in a written report. A Phase One involves no soil or groundwater sampling. It does not answer "is this land contaminated?" It answers "is there reason to suspect it might be?"

Two terms carry the report. A PCA — a potentially contaminating activity — is an activity, current or historical, of a kind listed in the regulation, on the property or in the study area, that could cause contamination. An APEC — an area of potential environmental concern — is the specific area on the property where, in the QP's judgement, contaminants may be present. The logic runs in that order: identify the PCAs, then decide which of them give rise to which APECs on this property. If no APEC is identified, the Phase One is where the process ends. If APECs are identified, you proceed to Phase Two. One caution: a CSA-standard Phase I done for general due diligence is not identical to a Phase One prepared under O. Reg. 153/04 in support of an RSC. If an RSC filing is anywhere in your future, tell the QP at the start so the work is done to the regulatory standard — otherwise you may pay for a report that cannot be used for that purpose and have to redo it.

Second: Phase Two tests, and its conclusions are measured against standards

A Phase Two is a physical investigation. The QP prepares a sampling plan, drills at locations tied to the APECs, collects soil and groundwater samples for laboratory analysis, and compares the results against the site condition standards applicable to the property's intended use. The outcomes are limited: no exceedances found, and you can proceed on evidence rather than hope; or exceedances found, in which case the work delineates how far the contamination extends, and the conversation turns to next steps — remediation to meet the standards, a risk assessment leading to property-specific standards, or back at the negotiating table: price, responsibility, and conditions.

An invented example, with the situation used only to illustrate: a property was historically used for auto repair and fuel sales with underground tanks. The Phase One identifies the tank area as an APEC. Phase Two sampling there finds petroleum-related parameters above the standards for the intended use. Now the buyer holds hard evidence: require the seller to address it, re-price the deal by the cost of cleanup, or walk away within the condition period. Without that report, the same buyer prices the land by feel — and if contamination surfaces after closing, the cleanup pressure lands first on the current owner. Pursuing whoever caused it historically is a separate, expensive, and slow exercise. That asymmetry is the entire case for investigating before you close.

Lenders understand this. Commercial and industrial financing commonly requires a Phase One report as a condition of advancing funds, so skipping the step yourself often just means meeting it later, on the lender's timetable instead of yours.

Third: the RSC is a mandatory gate for changes of use — budget for it early

Section 168.3.1 of the Environmental Protection Act and O. Reg. 153/04 draw the line: before a property's use changes from industrial, commercial, or similar uses to a more sensitive use such as residential, institutional, or parkland, an RSC must be filed. In an RSC, the QP certifies, based on the Phase One and, where required, the Phase Two, that the property meets the applicable site condition standards for the intended use, or standards set through a risk assessment. If it does not meet them, remediation or the risk assessment process comes first; only then can the RSC be filed and the use changed.

For a buyer, three costs must be counted before the offer: the time assessment and any remediation will take, which drives the project schedule; the cost of remediation or risk assessment, which drives what the land is actually worth to you; and the conditions in the offer itself — enough time for the Phase One, an extension mechanism if APECs require a Phase Two, who pays for what, and your right to renegotiate or exit if the results are unacceptable. Discovering the RSC gate after closing means rebuilding the project's economics from the ground up.

Stage What happens Question it answers
Phase One Records review, site reconnaissance, interviews — no sampling Are there PCAs and APECs — is there reason for concern?
Phase Two Drilling; soil and groundwater sampling and analysis, compared to standards Is contamination actually present, does it exceed standards, and how far does it extend?
RSC QP certification, filed in the Environmental Site Registry Does the property meet the standards for the intended use, so the use can change?

Common misunderstandings

"The Phase One said no concerns, so the land is clean." A Phase One takes no samples. Its conclusion is that no areas of potential environmental concern were identified — not laboratory proof of clean soil and water. On a property with a complicated history, that distinction matters.

"I have an environmental report, so I can file an RSC with it later." Reports prepared for general due diligence and reports prepared to O. Reg. 153/04 requirements for an RSC differ in scope and currency requirements. State the purpose before the work starts.

"The contamination was caused by owners decades ago, so it isn't my problem." Do not assume that. After closing, you are the owner, and the cleanup and compliance pressure lands on you first; recovering from others afterwards is a long and costly fight. Checking beforehand is the inexpensive route.

"I'm not changing the use, so environmental assessment is irrelevant." A change of use is only one trigger. Lender requirements, a sensitive historical use on the property, or a contamination source on a neighbouring property can each make a Phase One basic self-protection even when no RSC is required.

If you are about to buy commercial or industrial property, I suggest this order

  1. Reconstruct the historical uses of the property and its neighbours first. Fuel sales, dry cleaning, auto repair, printing, metal finishing, chemical use, or a scrap yard in the history means treat the property as high-sensitivity from the start.
  2. Put an environmental condition in the offer: enough time for a Phase One, an extension for a Phase Two if APECs are found, and a right to renegotiate or exit on unacceptable results.
  3. Tell the QP the purpose up front — lender due diligence only, or a future RSC filing — so the work follows the right framework (O. Reg. 153/04 or CSA) and is not done twice.
  4. If your plans involve a change of use, have your lawyer and QP confirm early whether an RSC is mandatory and which standards apply, and price the remediation time and cost into your offer.
  5. Decide on the evidence: no APECs, proceed; exceedances, negotiate cleanup responsibility, price, or exit — do not close on top of unquantified contamination risk.

I am Ming Ren. If you are buying commercial or industrial land, get what is under it checked first — we will go through the report, item by item.


This article is general information, not legal or environmental advice. ESA and RSC requirements depend on a property's history and intended use; consult an Ontario lawyer and a qualified person (QP) before acting.

Primary sources: Environmental Protection Act, R.S.O. 1990, c. E.19, Part XV.1 (including s. 168.3.1); O. Reg. 153/04 (Records of Site Condition), including Schedule D (Phase One) and Schedule E (Phase Two) (Ontario e-Laws, reviewed November 2026). The auto-repair and fuel example is an invented illustration, not a real transaction.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation