Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Commercial Real Estate & Leasing

Development Charges on Commercial and Industrial Land in Ontario: Classification First, Then the 50% Industrial Exemption

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Commercial Real Estate & Leasing · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: a development charge (DC) is not a province-wide number, and it is not negotiated in your land purchase agreement. It is a schedule in a municipal by-law passed under Ontario's Development Charges Act, 1997. The use classification drives the rate, and the money is generally payable before the building permit is issued. For a commercial or industrial project, three things decide the size of this line item: which use category your project falls into, whether the section 4 industrial enlargement exemption applies, and whether the rate in your pro forma comes from the current by-law — in particular, whether it still assumes the Bill 23 five-year phase-in discount that Bill 185 has since repealed.

This article takes the developer's view: where the charge comes from, how the industrial relief works, and when the cash actually leaves.

1. Rates live in the municipal by-law, and classification is the biggest variable

The principle behind DCs is that growth pays for growth: a one-time charge helps fund the growth-related infrastructure a development triggers — water, wastewater, roads, transit and community services. The provincial Act sets the framework; each municipality, and each regional municipality such as York Region, sets its own rates in its own DC by-law, typically per unit of gross floor area and broken into use categories such as industrial, office, institutional, retail and hotel.

That means the same site at the same floor area can attract a very different charge as retail than as industrial, and the same use can price completely differently in the next municipality. Any DC figure detached from a specific municipality, by-law version and effective date does not belong in a project model. This article therefore prints no city's current rate: those figures are indexed, and reset with each new by-law, and the only reliable source is the current by-law of the municipality where you are building. On a mixed-use project, classify each component separately, and resolve classification questions with the municipality early — classification decides the bulk of this cost line, not a rounding difference.

2. The statutory relief: enlarging an existing industrial building

Section 4 of the Development Charges Act, 1997 is the first provision an industrial developer should read. It governs DCs where a development enlarges an existing industrial building:

Size of enlargement Treatment under s.4
Gross floor area enlarged by 50% or less The DC in respect of the enlargement is zero
Gross floor area enlarged by more than 50% The DC is charged only in proportion to the part of the enlargement above the 50% threshold — the whole building is not re-assessed

Three points matter. First, this exemption is written into provincial statute and applies province-wide; it does not depend on a municipality's goodwill. Second, it applies to enlargements of an existing industrial building — a brand-new industrial building does not get it. Third, going over the line does not forfeit the relief: only the excess portion is charged, proportionately. How staged enlargements are treated cumulatively should be confirmed against the Act and the local by-law with professional advice.

There is also a second, municipal layer on the industrial side: some municipalities exempt industrial uses in their own by-laws or group them into a lower rate band, and others do not. That layer is local policy and cannot be borrowed from a neighbouring city. Work through both layers in order: the section 4 statutory exemption first, then your municipality's industrial classification and rate.

3. Timing: before the permit — and the phase-in discount is gone

Section 2 of the Act lists the development actions that can trigger a DC, including a zoning change, a minor variance, a conveyance, a plan of subdivision, a condominium description, or a building permit. For commercial and industrial development, the moment cash leaves is before the building permit is issued — not at construction start, and not at occupancy. In a cash-flow model, this charge sits ahead of the permit milestone, separate from land and soft costs.

Then correct one stale assumption that is still circulating. Bill 23 (the More Homes Built Faster Act, 2022) introduced a mandatory five-year phase-in: DC by-law rates were discounted in the early years of a by-law and only reached the full rate in year five. Bill 185 (the Cutting Red Tape to Build More Homes Act, 2024) repealed that mandatory phase-in, for by-laws passed since January 1, 2022, and also reinstated studies as an eligible DC cost. A pro forma that still builds in a first-year discount is wrong from its first line. And do not import the recent residential deferral arrangements into a commercial or industrial budget: non-residential charges should be planned as payable at the permit stage, with any municipal deferral program applied for and verified separately.

An illustrative example, using invented figures only to show the arithmetic and representing no municipality's rates: suppose an existing industrial building is enlarged by exactly half of its original floor area. Under section 4, the DC on that enlargement is zero. Enlarge it by more than half, and only the portion above the halfway mark is charged, proportionately, at that municipality's industrial rate. Which side of the line the design lands on changes the answer completely — so run this line before the design is final.

Three common misunderstandings

"DCs are roughly the same everywhere in Ontario — a neighbouring city's figure is close enough." No. Rates are set by each municipality's by-law, by use classification, and can differ widely between cities and between uses. Use the current by-law for the municipality of the project.

"Enlarge an industrial building by more than 50% and the whole building gets charged." No. Section 4 charges only the proportion of the enlargement above the 50% threshold. It is not a full recalculation.

"New by-laws are discounted in the first year, so budget the discount." That was Bill 23's mandatory five-year phase-in, and Bill 185 repealed it. Budgeting the discount systematically understates this cost.

If you are running numbers on a commercial or industrial project, do these five things in order

  1. Fix the classification first: break the project into its component uses and floor areas, classify mixed uses part by part, and confirm doubtful classifications with the municipality.
  2. Read the current by-law itself: take the DC by-law and rate schedule from the official pages of both the local and regional municipality, and record the effective date. Do not model from figures in articles or old pro formas.
  3. Run the industrial exemption separately: for an enlargement of an existing industrial building, test it against the 50% line in section 4 and list the exempt and chargeable portions apart.
  4. Place the payment in the cash flow before permit issuance, and do not borrow residential deferral timing for a non-residential project.
  5. Re-run the numbers whenever the design changes: crossing the 50% line or shifting a use classification changes the conclusion directly. Have a planning lawyer or DC consultant check the final version.

Trust Professional, Diligent Work. I am Ming Ren. When you build a development pro forma, bring the current by-law and the floor-area schedule, and we will go through the uses and areas item by item.


This article is general information only, not legal advice. DC by-law classifications, rates and deferral programs differ by municipality and are updated over time. Consult an Ontario planning lawyer or development charges consultant before acting, and rely on the current by-law of your project's municipality.

Primary sources: Development Charges Act, 1997, ss.2, 4, 26 (Ontario e-Laws); Ontario Environmental Registry decision summary on the Bill 185 (Cutting Red Tape to Build More Homes Act, 2024) amendments to the Development Charges Act, 1997 — repeal of the mandatory five-year phase-in and reinstatement of studies as an eligible cost (consulted November 2026). Any figures in the example are invented and illustrate only the section 4 arithmetic.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation