I am Ming Ren, a Broker with RE/MAX Realtron.
My conclusion up front: the roughly half hour of a showing is not a home inspection, and it does not replace one. Its real value comes before you offer — screening out the problems your eyes, ears, hands and phone can already find. Layout and finishes are the easy part. What actually drives your cost of living there is whether the water pressure holds, whether the windows open, whether the floor feels soft underfoot, and whether your furniture fits the storage. Miss those at the showing and you discover them after offering, when your only options are chasing them through an inspection condition or paying to fix them yourself.
First: wake the water and the power up — do not just stand in the doorway
A quiet, empty house hides everything. Once I am inside, I work through the water and the electrical, item by item.
Do not run just one tap. Run the kitchen, the main bath and the second bath in turn, hot and cold, and watch whether the pressure is steady, how long the hot water takes, and how fast things drain. Flush each toilet and listen to the tank refill. Run a shower for fifteen seconds and see whether the drain starts to back up. Pressure that looks fine at one tap but drops sharply when two run at once often points to aging supply or piping — not something a glance from the doorway will tell you.
Do the same with power. Flip every light switch in every room; note anything that flickers, stays dark, or feels warm. Carry a phone charger or a small outlet tester and focus on kitchen counters, bathrooms and the garage — outlets near water should have GFCI protection, and the test button should trip and reset. Glance at the electrical panel too: breakers or an old fuse box, any scorch marks or messy add-on wiring. If you cannot read it yourself, photograph it for your inspector.
And the item almost everyone forgets: take out your phone and check the signal. Stand in the basement, the primary bedroom and the room you would work from. Count the bars and load a web page. If you work from home, a dead basement signal is not a small thing, and it is an awkward problem to solve after you move in.
Second: read the traces water leaves, then test everything that moves
Water problems rarely perform for you live. The traces they leave are the evidence. My order: baseboards and crown moulding joints for staining, discolouration and bubbling paint; then interior window sills, walls beside bathrooms and basement corners for yellow marks or mould spots; then smell each room as you enter — a musty odour with no visible spot deserves a photo and a note even more. A small gap where crown moulding meets the wall can be seasonal wood movement. A wide gap with bubbling or stained paint should not be waved away as a cosmetic flaw. Cracks matter by type as well: a horizontal crack in a concrete foundation wall generally deserves more of your inspector's attention than a fine vertical one.
Then test everything that moves. Open, close and lock every window yourself. One that sticks, is painted shut, or will not seal is a problem; fogging between the panes of a double-glazed unit means the seal has failed and much of the insulation value is gone — one or two windows is a small bill, a whole house of them is a budget line. Bedroom windows matter most: they are also fire-escape routes, so one that will not open is a safety issue, not an inconvenience. Try every door as well. Several doors that will not close properly, with frame gaps wide on one side and tight on the other, may be pointing at something beyond the doors themselves. Walk the floors slowly, room by room. Stop and mark any spot that feels soft, dips, or creaks across a wide area. Hardwood edges lifting and tiles that sound hollow when tapped both go on the list — noted at the showing, confirmed with instruments at the inspection.
An illustrative sense of scale: one fogged window (illustrative) is a repair in the hundreds of dollars — negotiable, livable. But bubbling basement walls, a soft floor and several racked doors appearing together (illustrative combination) are not separate small flaws; they are signals that confirm each other, and your offer strategy should change completely.
Third: measure, listen, and ask who owns the equipment
The first two passes ask whether the house has problems. This one asks whether it fits your life.
Bring a tape measure. Measure whether the primary bedroom takes your bed and wardrobe, the fridge and laundry spaces, the true width and depth of the garage, and the stair turns and basement entry — a sofa that cannot get into the house is a miserable discovery after closing. Open the storage instead of trusting the listing: the real depth of closets, the pantry and basement storage. Photos and floor plans make rooms look bigger. A tape measure does not.
Give sound its own two minutes. With doors and windows closed, stand in the living room and primary bedroom and listen for traffic, trains or aircraft. Have someone walk upstairs and flush a toilet while you listen below for pipes and floor noise. If the furnace or air conditioner is running, stand at a vent, listen for anything unusual, and feel whether rooms heat or cool evenly. If the showing schedule allows, view again at a different time of day — a street that is quiet at noon can be a different place at rush hour.
Finally, ask who owns the equipment — an easy trap in Ontario. Water softeners and water heaters are often rented, not owned. Read the age off the equipment label, then ask directly: owned or rented, what monthly fee, what buyout price? A rental contract passes to the buyer at closing and should be dealt with clearly in the Agreement of Purchase and Sale. On a water softener, check the brine tank for a hardened salt bridge and any odour; on a unit around ten years old or more, ask for service records. Do not wait for the first rental bill after closing to learn what you have taken on.
Common misunderstandings
One: “There is an inspection later, so the showing can be casual.” The order is backwards. What you find at the showing decides whether you offer, whether your offer carries an inspection condition, and where you ask the inspector to focus. Seeing the house seriously for the first time at the inspection means negotiating from a weaker position.
Two: “Fresh paint and nice staging mean the house is in good shape.” Fresh paint and staging only prove the seller prepared the listing well. They say nothing about what is behind the walls or under the floors. The more polished the presentation, the more carefully you should run the taps, open the windows and walk the floors — skip nothing.
Three: “The seller has to tell me about every problem.” No. Under RECO's guidance, Ontario distinguishes patent defects from latent defects. A problem that reasonable viewing would reveal is, in principle, the buyer's to find; the seller has no duty to point each one out, though they must not actively conceal it. A known latent defect that makes a home unfit for habitation or dangerous must be disclosed. Your own eyes are the first — and often the most useful — line of defence.
Four: “A creaking floor and a sticky door must mean the foundation is failing.” Do not scare yourself either. Minor creaks and one slightly racked door are common in older homes and are not necessarily structural. The showing's job is to record and flag; the diagnosis belongs to the inspector or an engineer. What you must avoid is recording nothing at all.
Action checklist
- Bring four small things — phone (photos and signal), tape measure, charger or outlet tester, flashlight — and split the jobs on entry: who tests water and power, who measures.
- Run every tap hot and cold, flush every toilet, run a shower briefly and watch the drain, then feel the pressure again with two fixtures running.
- Test every light and switch; test GFCI outlets in the kitchen, bathrooms and garage; photograph the electrical panel.
- Open and close every window and door yourself; confirm bedroom windows open properly; photograph fogged panes and stained sills room by room.
- Walk the baseboards, sills and basement corners looking for staining, bubbling and cracks, and smell for damp or mustiness as you enter each room.
- Walk every room slowly and mark soft, dipping or noisy floor spots, noting which room each photo belongs to.
- Measure bed, fridge, laundry, garage and main storage spaces on the spot; write the numbers down instead of estimating from the floor plan.
- Confirm whether the water softener, water heater and similar equipment are owned or rented, with monthly fees and buyout prices, and send your full showing notes to your inspector as the focus list.
— Ming Ren, Broker, RE/MAX Realtron. Work through these items at the showing, and afterwards we will go through your photos and notes together: what is small money, what belongs in conditions, and what changes whether the home is worth offering on at all.
This article is general information, not legal advice and not an inspection report. Showing observations do not replace a licensed home inspector's professional examination. Whether a defect is a latent defect that must be disclosed depends on the facts of each case; consult an Ontario lawyer and a licensed home inspector before acting.
Primary sources: RECO consumer guidance and RECO Bulletin 7.4 on patent and latent defects; Ontario Building Code general principles on bedroom egress windows (reviewed November 2026). Illustrative scenarios are examples only, not real transactions.
Frequently asked questions
There is an inspection later, so can the showing be casual?
No, the order is backwards. What you find at the showing decides whether you offer, whether your offer carries an inspection condition, and where you ask the inspector to focus.
Fresh paint and nice staging mean the house is in good shape, right?
Not necessarily. Fresh paint and staging only prove the seller prepared the listing well; they say nothing about what is behind the walls or under the floors, so run the taps, open the windows and walk the floors anyway.
Does the seller have to tell me about every problem?
No. A problem that reasonable viewing would reveal is, in principle, the buyer's to find, though the seller must not actively conceal it. A known latent defect that makes a home unfit for habitation or dangerous must be disclosed.
A creaking floor and a sticky door must mean the foundation is failing, right?
Not necessarily. Minor creaks and one slightly racked door are common in older homes and are not necessarily structural. The showing's job is to record and flag; the diagnosis belongs to the inspector or an engineer.


