Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Buying a Home

Don't Just Look at the Finishes: At an Ontario Showing, I Check Water, Electrical and Heat First

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Buying a Home · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

Here is the conclusion first: a showing is not about whether you like the finishes. It is your first chance to size up the repair bills of the next few decades. Layout, light and the feel of the street matter, of course — but the things that cost real money hide in three systems: water, electrical and heat. Check those three first, then decide whether you like the house. Do not reverse the order.

One more point up front: buying in Ontario runs on buyer beware. The buyer is expected to do the checking. A seller generally has no duty to point out problems you can see for yourself, so if you miss something at the showing, it is hard to argue later that nobody told you.

First: a showing and an inspection are not the same thing

These two words get mixed up all the time. They are not the same job.

A showing is you walking through with your own eyes, ears and nose: does the basement smell damp, how does the water run, how quiet is it inside? It costs nothing and its job is to screen out homes that are clearly wrong for you.

An inspection is a systematic visual check by a home inspector. According to Ontario.ca, an inspector will typically examine the foundation, doors and windows, the roof, exterior walls, attics, plumbing and electrical systems where visible, heating and air conditioning, ceilings, walls and floors, insulation where visible, ventilation, and drainage away from the building. Note two limits. First, it is limited to what is visible — an inspector does not open walls or dig, so a problem hidden behind finishes may not be found. Second, Ontario currently has no mandatory qualifications for home inspectors, so Ontario.ca advises you to choose someone experienced, get a written contract setting out what will be inspected and the total cost, and confirm you will receive a report you can keep.

So the order is this: do your own showings first and narrow the field to one or two homes. Once you are serious about an offer, consider an inspector, and talk with your salesperson and your lawyer about whether to include an inspection condition in the Agreement of Purchase and Sale. How that condition is worded, and how many days it gives you, decides whether you can still walk away and get your deposit back in full if a serious problem turns up — read the actual wording in your agreement, not anyone's summary of it.

Second: once you are inside, watch three systems

There is a lot to look at in a house, and new buyers get pulled along by countertops, light fixtures and fresh paint. When I walk clients through, my attention goes to three places first. Everything else comes after.

System What to check on site Why it matters
Water Run the taps; look under sinks and around toilets and tubs for staining and mould; in the basement, smell for damp and check the bottom of the walls for water marks Leaks and water entry damage structure and grow mould over time, and the repair is rarely just one spot
Electrical Find the panel and note its capacity and age; in older homes, watch for old wiring; look up in an unfinished basement or attic to see how the wiring runs Electrical issues are a safety question, and they can also decide whether you can get insurance
Heat Find the furnace and record its year; ask whether the water-heating equipment is owned or rented; feel whether the rooms heat evenly A furnace at the end of its life is an expense you cannot avoid, and rented equipment is a long-term contract you would be taking over

A few extra words on electrical. The Electrical Safety Authority (ESA) has published guidance on knob and tube wiring, a method used from the early 1900s to the 1940s that is no longer installed today. The ESA position is not that every home with this wiring must be rewired. Existing knob and tube may remain in place if it is protected by a 15 amp fuse or circuit breaker, no outlets have been added so as to overload the circuit, and the visible conductors are in good condition — but a Licensed Electrical Contractor should check it for deterioration, damage and unsafe alterations. The ESA also notes that many insurers will not cover homes with this wiring, or will require replacement first. So if you spot old wiring at a showing, do not declare the house unbuyable, and do not ignore it either. Write it down, and before you firm up, call your insurer and confirm the home can be covered.

If the home is on a private well, there is one more water check. Public Health Ontario provides free bacterial testing for private well water, testing for E. coli and total coliforms. The free test covers bacteria only, not chemicals — keep that distinction clear. Ask at the showing whether the home is on municipal water or a well, and if it is a well, build the testing into your conditions and your timeline.

For heating, the year matters more than the brand. Take an example with numbers I made up only to show the method: if a furnace has already been in service for 18 years (illustrative figure), hold a replacement budget in your head for the next few years (illustrative figure) and compare that total against the asking price, instead of judging the price on its own.

Third: what you see has to end up on paper

A problem you noticed at a showing is worth little if it stays at "I think I remember." I ask buyers to do three things: photograph it, write down the numbers, and ask.

Photograph the panel label, the furnace plate and the year sticker on the water-heating equipment, so you can check them at home. Write the hard numbers — years, capacities — into your phone on the spot instead of relying on memory. And ask the listing salesperson directly: has the basement ever taken in water, when was the roof last replaced, is the water heater rented or owned? Once you ask, the answer has to be truthful. If you never ask, a great deal is left to what you happened to notice.

Two concepts are worth stating plainly. The Seller Property Information Statement (SPIS) is, according to RECO, voluntary — a seller may decline to complete one, so a missing SPIS does not mean the home has a problem, and a completed SPIS is not a warranty. Defects also come in two kinds. A patent defect is one you can see, and a seller generally has no duty to point it out to you. A latent defect is hidden, and if the seller knows it makes the home dangerous or unfit for habitation, the seller must disclose it. In plain terms: what you can see at the showing is mainly your own eyes' responsibility; the hidden, dangerous problems are what the seller's disclosure duty covers.

Three common misunderstandings

Misunderstanding one: "The seller never mentioned it, so there is no problem." No. Ontario is buyer beware. A seller generally does not have to volunteer visible problems. If you did not ask, look or test, discovering something later does not make it concealment.

Misunderstanding two: "I hired an inspector, so the home has been fully checked." No. An inspection is visual. It covers what can be seen and safely reached — no opening walls, no digging. Problems inside walls or underground can still be missed, and a report is not a warranty.

Misunderstanding three: "An older home with old wiring can never be bought or insured." That is too sweeping. Under the ESA guidance, knob and tube wiring in good condition with proper protection may remain in place. The key steps are an assessment by a Licensed Electrical Contractor and confirmation from an insurer. Insurability is something you ask about, not something you guess.

If you are going to a showing, I suggest this order

  1. Charge your phone and bring a flashlight. Book showings in daylight where you can — natural light shows light levels and wall problems most honestly.
  2. Do not start with the finishes. Walk the basement first: smell, check the bottom of the walls and the foundation walls, then go back upstairs.
  3. Find the water, electrical and heating equipment, photograph each plate and year, and write the numbers down on the spot.
  4. Run the tap and shower in every bathroom, check the flow, and look under the cabinets and around the toilet base for water marks.
  5. Stand still in the living room and the main bedroom for half a minute each and listen — traffic and neighbourhood noise — then walk a short stretch of the street to see how it is kept and how parking looks.
  6. List your questions and ask the salesperson on site; write the answers down. If the home has a well, ask about the well and the septic system as well.
  7. Sort your photos and notes the same day, keep only the homes you are seriously considering, then work out the inspection and the offer conditions — and their deadlines — with your salesperson and lawyer.

Do things honestly, and do the work solidly. I am Ming Ren. A showing is not something to rush: understand the water, the electrical, the heat and the paperwork first, then decide whether to act — with the costs and the risks clear before you sign.


This article is general information only, not legal advice, and not a home inspection or an electrical assessment. The facts of a specific home, the terms of an agreement and condition deadlines can change the conclusion. Before acting, consult an Ontario lawyer and, as needed, a home inspector and a Licensed Electrical Contractor.

Primary sources: Ontario.ca, "What to know before buying a home" (inspection scope, no mandatory inspector qualifications, written contract); RECO guidance on latent and patent defects and the voluntary SPIS; Electrical Safety Authority Flash 25-05-FL, "Knob and tube wiring in residential installations" (May 2025); Public Health Ontario free bacterial testing for private well water (consulted November 2026). The furnace-age figures in this article are illustrative numbers, not a real case.

Frequently asked questions

If the seller never mentioned a problem, does that mean there is none?

No. Ontario is buyer beware, and a seller generally does not have to volunteer visible problems. If you did not ask, look or test, discovering something later does not make it concealment.

Does hiring an inspector mean the home has been fully checked?

No. An inspection is visual and covers what can be seen and safely reached, with no opening walls and no digging. Problems inside walls or underground can still be missed, and a report is not a warranty.

Can an older home with old wiring never be bought or insured?

That is too sweeping. Under ESA guidance, knob and tube wiring in good condition with proper protection may remain in place. The key steps are an assessment by a Licensed Electrical Contractor and confirmation from an insurer.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation