Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Commercial Real Estate & Leasing

Why the Area in Your Lease Is Bigger Than the Space You Can Use: Rentable vs. Usable, Explained

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Commercial Real Estate & Leasing · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: when the area in your lease is larger than what your tape measure shows, the landlord has usually not measured wrong — two different rulers are measuring two different things. The ruler your rent is charged on is called rentable area; the ruler for the space you can actually put desks and shelving in is called usable area. Rentable is always equal to or greater than usable. The difference is your proportionate share of the lobby, the shared corridors, the shared washrooms, and floor and building service space. If you do not separate these two numbers before you sign, the rent per foot you compared and the fit-out budget you planned are wrong from step one.

1. Two areas — what each one actually measures

The mainstream method for measuring office space in North America is the office standard published by BOMA International. The current edition is ANSI/BOMA Z65.1-2024 (BOMA 2024 for Office Buildings), which replaced the 2017 edition. BOMA has maintained this standard since 1915, and its core purpose is a single one: to define how rentable area is calculated, without ambiguity.

Under that framework, the two numbers divide this way:

Area What it measures Who relies on it
Usable area The space you occupy exclusively: offices, meeting rooms, and the circulation and storage inside your suite — excluding the building's shared areas You, your designer, and your contractor, for planning and fit-out
Rentable area Usable area plus your proportionate share of common areas: the lobby, shared corridors, shared washrooms, and floor and building service areas The landlord, to charge rent and to allocate your share of operating costs

Two details are easy to miss. First, major vertical penetrations — elevator shafts, stairwells, and similar openings that run through multiple floors — are excluded under the standard; they do not enter rentable area. Second, the edition matters: the 1996, 2010, 2017, and 2024 editions do not allocate space in exactly the same way, so the same suite can produce a different rentable figure under a different edition. A lease that says only "measured to the BOMA standard" is not specific enough — it should name the edition year and whether Method A or Method B applies. Retail and industrial properties have their own separate BOMA standards; do not apply the office standard to a warehouse or a shop.

2. How the load factor works — and how it rewrites your real rent

The link between the two numbers is the load factor (also called the add-on factor):

Load factor = rentable ÷ usable; rentable = usable × load factor.

Subtract 1 from the factor and you get the add-on percentage. A factor of 1.18 means that for every foot you can use, you pay for 1.18 feet — the extra 18% is the add-on.

Take an illustrative example I have made up purely to show the arithmetic; these are not figures from any real building. Suppose your usable area is 1,500 square feet and the building's load factor is 1.20. Your rentable area is 1,800 square feet. At a quoted rent of $30 per rentable foot per year, you pay $54,000 a year — which, measured against the space you can actually use, is a real cost of $30 × 1.20 = $36 per usable foot. Now compare a second building quoted at $33 per foot, which looks more expensive, but with a load factor of only 1.08: its real cost is $35.64 per usable foot — cheaper than the first building. Compare the quoted rates alone, without the factors, and the conclusion comes out exactly backwards.

That is why, when I look at commercial space, I always ask for the factor before the rate. A building with a grander lobby, wider shared corridors, and more shared amenities will naturally carry a higher factor. That is not necessarily a trap — you do use those spaces — but you should know what the extra money is buying before you decide whether it is worth it.

3. Before signing, check more than the area itself

The area calculation has three more doors to open before you sign.

First, get the measurement basis on paper. Ask the landlord for the measurement report or certificate, stating which edition of ANSI/BOMA Z65.1 was used, which method, and listing both the usable and the rentable figures. A quote that gives you rentable alone, with no usable figure, does not even let you calculate the factor — and without the factor you cannot compare the space against any other building.

Second, read the remeasurement and area-adjustment language carefully. If the building's common areas are reconfigured during your term, or you expand or contract, will the rentable area be recalculated, to which standard, and how are errors corrected and rent adjusted? If the lease is silent, there is no agreed ruler when a dispute arrives.

Third, remember that cost allocations follow rentable area. Your share of operating costs is usually calculated as your rentable area over the building's total rentable area. An overstated area therefore costs you twice: once in base rent, and again in your share of operating costs. Verifying the area verifies both bills at once.

Three misunderstandings I hear most often

"The lease area is bigger than my measurement, so the landlord is overcharging me." No. Rentable area is designed to include a share of common areas, so being larger than usable is how the system works, not an error. What you should actually check is which edition the allocation was measured under, what the factor is, and whether a measurement report supports it.

"The building with the lower rent per foot must be cheaper." Not necessarily. Rent per foot is quoted on rentable area, and different factors make quoted rates incomparable. Convert every quote to an annual cost per usable foot, then compare — only then are you using the same ruler.

"The BOMA standard is the law, so every building must use the latest edition." No. The BOMA standard is an industry standard, not an Ontario statute. It binds you because your lease adopts it. Which edition and which method apply is a matter of lease drafting — which is exactly why the edition and method must be pinned down before signing, rather than assuming the other side used the newest one.

If you are reviewing a commercial lease, do these five things in order

  1. Ask for both numbers at the outset: usable and rentable, stated together — then calculate the load factor yourself, and ask about any figure that does not reconcile.
  2. Write the measurement basis into the letter of intent and the lease: the edition year of ANSI/BOMA Z65.1, Method A or Method B, with the measurement report attached.
  3. Convert every candidate space to the same basis — total annual cost per usable foot, base rent plus cost allocations — before comparing, instead of comparing quoted rates per rentable foot.
  4. Read the area-adjustment clause: what triggers a remeasurement during the term, under which standard, and how errors are corrected and rent refunded or topped up. If it is not there, add it.
  5. Leave yourself a ceiling on the factor: if you are concerned that a future remeasurement or a common-area reconfiguration could push the factor up, raise a load factor cap at the letter-of-intent stage and have it written into the lease before you sign.

Trust Professional, Diligent Work. I am Ming Ren. The area page of a commercial lease looks like the dullest page in the document, yet it sets the base for every payment across the whole term. Separate the two numbers first — then we can talk about rent and term.


This article is general information only, not legal advice and not a measurement opinion. Area figures should rest on a professional measurement report prepared to the standard named in the lease. Consult an Ontario lawyer and a qualified measurement professional before signing.

Primary source: BOMA International, BOMA 2024 for Office Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.1-2024), and the official BOMA Standards pages (boma.org, consulted November 2026). The figures of 1,500 square feet, a 1.20 factor, and $30 and $33 per foot are illustrative only, not real quotes.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation