I am Ming Ren, a Broker with RE/MAX Realtron.
Here is the plain conclusion first: a condo's square footage is not one number. It is the product of one particular ruler, and change the ruler and the number changes. The ruler used to sell new homes measures to the outside face of the exterior walls and the centre line of the walls you share with neighbours, so the thickness of your walls is counted as part of your home. Balconies and terraces are not counted at all; they are listed separately. And the floor you can actually put furniture on and walk across is always smaller than the number in the brochure. So when the same unit shows two or three different sizes — in the builder's materials, in MPAC's records, and in a resale listing — that is not surprising. Ask which ruler produced each number before you decide whether the price is fair.
1. The ruler for new homes
For new construction there is a single set of rules. Directive 3, "Floor Area Calculations," issued by Ontario's Home Construction Regulatory Authority (HCRA), effective February 1, 2021 and the successor to Tarion's Builder Bulletin 22, requires licensed builders to use this standard method whenever floor area appears in advertising, sales material or a purchase agreement:
- Walls shared with a neighbouring unit (demising walls): measured to the centre line of the wall — you and your neighbour each get half the wall's thickness.
- Exterior walls: measured to the exterior surface of the wall — the full thickness of the wall counts toward your area.
- The corridor wall: also measured to its exterior surface, the side facing the hallway.
- Mechanical shafts and chases that serve only your unit: included in the area.
- Stairs: treads and landings may be included, but if the stair opening is larger than the stairs themselves, the extra open area is deducted.
Two details are easy to miss. First, construction tolerance: the method allows the total area to vary by plus or minus 2.0%. Second, in a high-rise, a builder may quote the area of a typical unit of that model measured on the middle floor, with a note that lower-floor units may have less floor space because structural members are thicker, and higher-floor units may have more. On top of that, any sales material that states an area must carry the notice: "Actual usable floor space may vary from the stated floor area." That sentence is not boilerplate courtesy. It is telling you, in plain terms, that part of the stated number is wall you cannot stand on.
2. Why the balcony is not part of the number
Under the same HCRA directive, an open balcony is not included in the floor area. An enclosed balcony is not included either, unless it was designed as year-round habitable space and is heated and insulated to the Ontario Building Code. A finished, enclosed atrium or sunroom genuinely built for four-season use may be included. An ordinary condo balcony does not meet that test, so the correct presentation is to show the balcony separately — suite area on one line, balcony area on another — and never to add the two together and call the sum the size of the suite.
There is a legal point that lines up with this. In most condominium projects, a balcony is part of the common elements that the declaration reserves for the exclusive use of one unit (an exclusive-use common element). In other words, the right to use it is yours, but it sits outside the boundary of your unit itself — which is exactly why it is not in the square footage. A large, well-oriented balcony is a real living benefit, and it can be worth paying for. But you are paying for enjoyment, not buying area.
While we are clearing things up, the same applies to maintenance fees. How much you pay each month is generally set by the proportion of common interest recorded for your unit in the declaration, used to share the building's common expenses — it is not recalculated from the advertised floor area. So when two area figures disagree, that alone usually does not change your fees. To check your fees, look at the proportion in the declaration first, not at the brochure area.
3. Why the same unit shows different numbers in different places
The resale market has no single mandatory measuring method identical to the new-home rule, and different records measure area for different purposes, so the numbers do not line up. The usual sources are:
- The builder's floor plan: the HCRA ruler described above — walls included, balcony excluded. Many resale listings simply carry the original brochure figure forward.
- MPAC records: MPAC, the Municipal Property Assessment Corporation, records area for assessment and taxation purposes. Under MPAC's published approach, a condominium is assessed using the total square feet of living area, gathered and measured under its own method and data sources (building permits, plans, inspections and the like), which is not the same thing as the builder's method. Owners can see their own property's assessment information through AboutMyProperty.
- A measurement taken for the listing: some listings are measured inside the unit, or under another measurement standard, and those figures generally come out smaller than the builder's number. MLS listings also commonly show size as a range rather than a single figure.
A simple example, with invented numbers used only to show the arithmetic: suppose (illustratively) a unit is priced at $660,000. At the builder's figure of 660 sq ft, that is exactly $1,000 per square foot. Measured another way at 600 sq ft, the same home is $1,100 per square foot. The home did not change; the denominator did. Price per square foot only means something when both homes being compared were measured with the same ruler — with different rulers, the "cheaper" and "dearer" unit can easily swap places. When you compare, do not stop at the total area: check the length and width of each room on the floor plan. Whether a queen bed and a wardrobe actually fit is something room dimensions will tell you honestly.
Misunderstandings I hear most often
"The balcony is huge, so this unit is a deal on size." A balcony never enters the square footage, however large it is. Whether it is worth money depends on its orientation, its view and whether you will actually use it — a separate account from the area figure.
"The numbers don't match, so the seller must be inflating the size." Not necessarily. Check the source first: a builder figure, an MPAC figure and a measured figure are produced by different rulers, and once you add the 2% construction tolerance and rounding, small differences are normal. A difference that is large and cannot be explained by its source is a different matter — listing information should never be vague or misleading, and that kind of gap deserves hard questions.
"The unit with the lower price per square foot is the cheaper unit." With different denominators, that conclusion does not hold. Put both units on the same basis first, then calculate. If you cannot put them on the same basis, compare total price, room dimensions and how usable the layout is.
"If I enclose my balcony, it becomes square footage." Not automatically. Under the HCRA method, the space would have to be designed for year-round habitation and heated and insulated to the Building Code before it could count — and enclosing a balcony also raises condominium-rule and permit issues. You cannot enclose it yourself and then price it as area.
Before you buy, check in this order
- Ask one question first: where did this area figure come from — the builder's floor plan, MPAC, or an actual measurement? Treat a figure with no stated source as a question mark.
- Look at the breakdown on the floor plan: are suite area and balcony area listed separately? If there is only one total, ask directly whether the balcony was added in.
- Check each room's length and width, and mentally place your own furniture in it. Do not rely on the total alone.
- Cross-check MPAC: ask the seller or the listing agent for the MPAC property information and set it beside the listed area. If they differ, ask which ruler explains the difference.
- Give the documents to your lawyer: ask them to confirm, from the building's declaration and description, exactly where your unit's boundaries run and which parts are common elements reserved for your use.
- Compare on one basis only: if you are going to use price per square foot, convert every unit you are comparing to the same source of area first. If that cannot be done, compare total price and the layout itself.
Trust Professional, Diligent Work. I am Ming Ren. When a condo's numbers do not agree, do not rush to a conclusion — put the brochure, the MPAC record and the floor plan side by side, and we will go through them source by source.
This article is general information only, not legal, appraisal or measurement advice. The area of a specific unit is governed by its documents and, where needed, a professional measurement. Consult your lawyer and your licensed real estate representative before transacting.
Primary sources: HCRA Directive 3 – Floor Area Calculations (effective February 1, 2021, updated March 22, 2021; successor to Tarion Builder Bulletin 22); MPAC, How We Assess Residential Properties and condominium assessment guidance (mpac.ca, consulted November 2026). The $660,000, 660 sq ft and 600 sq ft figures are illustrative only, not a real transaction.


