I am Ming Ren, a Broker with RE/MAX Realtron.
The plain conclusion first: when the same condo shows several different sizes in Ontario, it is usually not a scam. Each number was measured a different way. The real trap is comparing price per square foot across different measurement bases — that comparison is wrong before it starts. Before you offer, ask one question: who measured this number, on what basis, and does it include the balcony?
1. Three numbers, three sources
The size you see when shopping usually comes from one of three places, and each is measured differently:
| Source | How the number is produced | What to watch for |
|---|---|---|
| Builder floor plan / pre-construction material | When a licensed builder states an area for a new home, HCRA Directive 3 sets the method: exterior walls are measured to the outside face, walls shared with a neighbouring unit to the centre line, and corridor walls to the outside face | Wall thickness is included, so this figure is larger than the clear space you stand in; the material must also carry the note that actual usable floor space may vary from the stated floor area |
| MPAC record | MPAC records residential size for assessment and taxation purposes, using exterior dimensions on its own assessment basis | This is a tax and valuation figure. It is not the builder basis and not your inside clear space, so a mismatch with MLS is common |
| MLS listing size | Entered by the listing brokerage, from sources such as the original builder plan, MPAC, an earlier listing, or an actual measurement | There is no single mandatory province-wide measurement method for resale listings in Ontario; a different source can mean a different number |
The key distinction is this. For new homes, HCRA gives builders one standard method, allows a tolerance of plus or minus 2% on a stated area, and does not require a builder to state an area at all — but if one is stated, it must follow the directive. Resale is different: no rule forces every brokerage in the province to measure the same way. RECO's requirement is separate — under the TRESA Code of Ethics, registrants must make best efforts to ensure representations are accurate and not misleading, and a figure that cannot be confirmed should be left out or properly qualified with its source. In plain terms, a resale listing size is only as reliable as the checking behind it.
2. Walls and balconies explain most of the gap
Two things account for most size disagreements: walls, and the balcony.
Walls first. Under the builder method, exterior walls are measured from the outside face and shared walls count for half their thickness. Part of the area you are paying for is therefore concrete and wall material — space no furniture will ever occupy. Two units with identical paper sizes can live very differently: a squarer layout with a short hallway uses its area well, while long corridors, columns projecting into rooms and awkward corners quietly eat usable space. When you read a floor plan, look at the length and width of each room, not just the total.
Then the balcony. Under the HCRA directive, open balconies and terraces are not counted in the stated area, unless the space is built for year-round use — heated and insulated to Building Code standards, which almost no ordinary condo balcony is. A proper plan therefore lists interior area and balcony area separately. If a document gives you one total and cannot say whether the balcony is in it, stop and get that answered before you negotiate. Also know this: in most condominiums the balcony is an exclusive-use common element. Only you may use it, but it sits outside your titled unit boundary, as set out in the corporation's declaration.
Here is an example I made up, with numbers chosen only to show the arithmetic: suppose a unit is listed at 900 square feet for $720,000, which works out to $800 per square foot. The MPAC record for the same unit says 840 square feet, which works out to about $857 per square foot. The home did not change and neither did the price — only the denominator did, and the per-foot figure moved by more than $50. Compare that number against another unit measured on yet another basis and the ranking quickly stops meaning anything.
3. Price per square foot only works like-for-like
Price per square foot is a handy reference, but it has one condition: every unit in the comparison must use the same source and the same basis. Listings that all follow the original builder plans can be compared. A builder figure against an MPAC figure cannot.
By the same token, when one unit looks unusually cheap per square foot next to others in the building, do not assume you found a bargain. Check first whether its area includes the balcony, whether the figure was carried over from a listing years ago, and whether a long hallway is inflating the total. A bigger number does not always mean a bigger home, and a cheaper per-foot number does not always mean a cheaper home.
Common misunderstandings
Misunderstanding 1: “The size on MLS is government-certified.” It is not. MLS is listing information, not a government certification. RECO requires registrants not to mislead and to do their checking, but with no single mandatory resale measurement method in Ontario, a listing figure can still trace back to old records. On a purchase that matters, verify it yourself.
Misunderstanding 2: “The balcony is large, so the unit's area should be larger.” However large it is, a balcony is not counted in interior area on the builder basis. It is listed and valued separately. Look at interior space and balcony space as two different things, not one blended number.
Misunderstanding 3: “I measured it myself and got less, so the seller inflated the size.” Not necessarily. Your tape measures clear space inside the walls; the builder basis includes wall thickness, so it is expected to come out larger. Match the basis first, then argue about the number — a gap of a few percent between different bases is normal.
Before you offer, check in this order
- Ask where the listing size came from: original builder plan, MPAC record, an earlier listing, or an actual measurement? Have your agent confirm the source in writing, not just say “about that big.”
- Get a floor plan with room dimensions and check each room's length and width. Confirm the balcony area is listed separately. If the plan shows no room dimensions, ask the listing brokerage for them.
- Compare the MPAC record and the documents in the status certificate package. A small gap is a difference in basis; a large, unexplained gap is a question to resolve before you offer, not after.
- Measure on site. Bring a tape or a laser measure and check the clear length and width of the living room and the main bedroom. Confirm your largest furniture actually fits — the paper number has to end in a home you can live in.
- Calculate price per square foot only against units on the same basis; if the bases differ, restate everything from one source first. If a large difference still cannot be explained, hire a professional measurement service for a formal report before deciding whether to offer.
Work honestly, and do solid work. I am Ming Ren. If a condo's sizes do not line up, bring the floor plan, the MPAC record and the listing together, and we will reconcile them on one basis, line by line.
This article is general information only, not legal or measurement advice. A unit's legal boundaries are defined by its condominium corporation's declaration and description; for an individual case, consult an Ontario lawyer or a licensed measurement professional.
Principal sources: HCRA Directive 3 – Floor Area Calculations (effective February 1, 2021, updated March 22, 2021; successor to Tarion Builder Bulletin 22); MPAC, “How we assess residential properties” (mpac.ca); TRESA Code of Ethics, O. Reg. 365/22, s.5, and RECO guidance that representations must be accurate and not misleading (checked November 2026). The 900 sq ft and $720,000 figures are illustrative only, not a real listing.


