Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Buying a Home

60, 100 or 200 Amps? Why an Older Ontario Home's Electrical Service Can Decide Your Insurance

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Buying a Home · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: a home with 60-amp service is not a home you cannot buy. It was code-compliant when it was built. What actually decides the deal is two other questions — whether that capacity still runs a modern household, and whether an insurer will cover the home as it stands. Keep the order straight: identify the capacity, ask an insurer about that specific home, and only then negotiate price and who pays for an upgrade.

1. What the three numbers mean

The amp rating is the ceiling on how much power the whole house can draw at once. Ontario's Electrical Safety Code, following the Canadian Electrical Code, sizes a service from the calculated load. Under Rule 8-200, a home with 80 square metres or more of living space (excluding the basement) is calculated on a basic load of 24,000 watts — that is 100 amps at 240 volts. Below 80 square metres, the basic load is 14,400 watts, or 60 amps. That is the code basis for calling 100 amps today's starting point.

Service Typically found in What it means in practice
60 amps Older homes, often with a fuse box Central A/C, an electric range and a water heater running together already strain it; EV charging is out of the question without an upgrade
100 amps Today's common minimum Fine for most households; adding an EV charger, a heat pump or an addition calls for a load calculation first
200 amps Newer and larger homes Headroom for chargers, pools, hot tubs and second units

How to check on a showing: open the panel and read the number on the main breaker — that is the service size. Then note whether it is a fuse box or a breaker panel. A fuse box is not illegal by itself, but it tends to arrive packaged with 60-amp service and dated wiring, and insurers read that combination as one risk signal.

2. Why insurers care, and why answers differ

An insurer is not really underwriting a number; it is underwriting an aging electrical system. On an application they ask about service size and panel type, and each insurer answers differently: some require an upgrade to 100 amps before they will insure, some surcharge, and some will not quote at all. That is underwriting policy, not a single rule in law — which is why "60 amps is uninsurable" and "60 amps is fine" are both statements you should refuse to accept without asking about the actual house.

Follow the chain if the answer is no: no insurance can mean the lender will not fund, and the deal is at risk. That is why the insurance question belongs inside your offer's condition period, not in the week before closing.

3. How an upgrade is properly done

If you hire someone to do electrical work in Ontario, by law it must be a Licensed Electrical Contractor — a business holding a seven-digit ECRA/ESA licence number. A certified electrician or a master electrician cannot be hired directly to work in your home, and a general contractor is not licensed to do the electrical part of your renovation.

The proper sequence: the contractor files a notification of work (the "permit") with the Electrical Safety Authority before work starts, coordinates any disconnect and reconnect with the utility, and when the work is done the ESA inspects it and issues a Certificate of Acceptance. Keep that certificate. Insurers ask for it, and so do buyers when you resell. An upgrade done with no notification and no inspection counts, for insurance and resale purposes, as an upgrade that never happened.

One invented example to show how to run the numbers (illustrative figures only): a home is listed $15,000 below a recent comparable sale and looks like a deal — but it has 60-amp service and a fuse box, and a contractor's on-site quote to upgrade to 200 amps is $6,500. Your true saving is $8,500, minus the time it takes to sort out insurance and quotes inside the condition period. That arithmetic belongs on the table before you sign, not after.

And separate two jobs that get confused: swapping the panel without changing the service entrance does not raise capacity at all. Insurers ask about service size, so "the panel was just replaced" is not an answer to their question.

Three misunderstandings I hear most often

"60 amps means the house is illegal to live in." No. The home was built to the code of its day, and 60 amps remains a recognized size for smaller homes. The issue is capacity and insurability, never legality of occupancy.

"A new 200-amp panel makes it a 200-amp service." The panel only distributes power. If the service conductors, meter base and entrance are unchanged, the ceiling is unchanged. A real upgrade changes the service itself and goes through ESA notification and inspection.

"Any licensed electrician can do the job cheaper." In Ontario you hire the licensed contracting business, not the individual tradesperson. Work by an unlicensed operator can give your insurer a reason to deny a claim — an expensive way to save money.

If you are looking at an older home, do these five things in order

  1. On the showing, open the panel, photograph the main breaker's amp rating, and note fuse box versus breaker panel.
  2. If it is 60 amps or a fuse box, call your insurance broker before you offer and ask what that insurer requires for that home.
  3. Complete the insurance confirmation inside the condition period; if an upgrade is required, get a Licensed Electrical Contractor's on-site quote rather than budgeting from online averages.
  4. Put the upgrade cost into the negotiation explicitly — seller pays, buyer pays, or the price absorbs it — and write down what was agreed.
  5. If the upgrade is done, close with the ESA Certificate of Acceptance in hand and keep it with the invoice for renewals and resale.

Trust Professional, Diligent Work. I am Ming Ren. If an older home's panel or an insurer's answer has you unsure, bring the panel photo and the insurer's reply and we will go through the numbers and the paperwork, item by item.


This article is general information only, not legal advice and not electrical advice. Load calculations, underwriting requirements and upgrade scope are matters for the ESA, a Licensed Electrical Contractor and your insurer, in writing.

Primary sources: Ontario Electrical Safety Code, Rule 8-200 (basic load: 24,000 W / 100 A for homes of 80 m² or more); Electrical Safety Authority (esasafe.com) on Licensed Electrical Contractors being the only businesses that may be hired for electrical work in Ontario, notifications of work filed before work starts, and the Certificate of Acceptance (consulted November 2026). The $15,000 and $6,500 figures are illustrative only, not real quotes.

Frequently asked questions

Does 60 amps mean the house is illegal to live in?

No. The home was built to the code of its day, and 60 amps remains a recognized size for smaller homes. The issue is capacity and insurability, never legality of occupancy.

Does a new 200-amp panel make it a 200-amp service?

The panel only distributes power. If the service conductors, meter base and entrance are unchanged, the ceiling is unchanged; a real upgrade changes the service itself and goes through ESA notification and inspection.

Can any licensed electrician do the upgrade cheaper?

In Ontario you hire the licensed contracting business, not the individual tradesperson. Work by an unlicensed operator can give your insurer a reason to deny a claim.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation