I am Ming Ren, a Broker with RE/MAX Realtron.
The plain conclusion first: the lease is still the easy part. A craft brewery tenant's difficulty is that “opening a brewery” is actually three different activities — brewing the beer, selling it to take away, and serving it to drink on site — and Ontario's liquor system gives each one its own licence or endorsement. Miss one, and the business model has a hole in it. On top of that sits zoning, where production, retail and on-site drinking are permitted on different terms. Before signing, get the tenant to say exactly which activities are planned, then match each one to a licence and a zoning answer.
First: the foundation is the AGCO Manufacturer's Licence
Under the Liquor Licence and Control Act, 2019, the AGCO licence structure puts producers under the Manufacturer's Licence, with Winery, Brewery and Distillery classes; a beer maker is the Brewery class. That licence is what authorizes manufacturing and selling product into channels such as the LCBO. One misunderstanding is worth clearing up at the start: holding a manufacturer's licence does not by itself authorize selling liquor to consumers from the plant, and it certainly does not authorize running a bar rail by the glass. Retail and on-site drinking each have their own paper, as the next section sets out.
For a landlord, this layer is a foundation check: before signing, ask to see the Manufacturer's Licence (Brewery) and confirm the licensed entity is the same entity named as tenant in the lease. If the foundation licence does not exist, every conversation about taprooms and retail shelves is built on air.
Second: retail store, by-the-glass, restaurant — each format adds an endorsement
The AGCO's published licence structure lays the add-ons out clearly, each sitting on top of the manufacturer's licence as an endorsement or a related licence class: a retail store at the manufacturing site selling the maker's own products runs on the Retail Store side of the structure; serving drinks for consumption at the plant needs the By-The-Glass endorsement; a restaurant-bar at the same municipal address showcasing the manufacturer's products is the Tied House class of liquor sales licence; and a brew pub is a Brew Pub endorsement on a liquor sales licence. Every added format means another application and another set of premises conditions, with its own timing and fit-out cost.
In the lease negotiation, this forces a complete format list from the tenant: brewing only? Brewing plus retail? Or brewing, retail and a taproom? The three models differ enormously in floor area, fit-out, drainage and traffic, and in the rent they can carry. The lease timetable should be aligned to the licence milestones — which formats open first, which endorsements are still in application — and written into the document, so the tenant does not sign rent priced on the full-format revenue and then come back for relief when only half the formats land.
Third: zoning comes in three layers, and drainage is a premises condition
Zoning is where this tenant type most often trips. Brewing is a production or manufacturing use; whether it can sit in a main-street commercial unit, and at what size, must be checked lot by lot — many municipalities put floor-area caps or conditions on beverage manufacturing in commercial zones. In an employment or industrial zone the production side is comfortable, but the retail store and restaurant become accessory uses with floor-area share limits. The same “brew + retail + restaurant” package is constrained by opposite ends in the two locations. Before signing, take the exact address and the complete format list to the municipality for written zoning confirmation, layer by layer — production, retail, drinking — rather than asking the single question “can a brewery go here?”
The premises also carry a hard utility condition: brewery wash-down wastewater is not restaurant-scale in volume or strength, and municipal sewer-use by-laws regulate what may be discharged; pretreatment and discharge approvals can become conditions of opening, at real cost and time. The lease should place sewer-use compliance, related approvals and pretreatment equipment on the tenant, and production basics — floor drains, load capacity, ceiling height, freight movement — should be confirmed by the tenant's equipment side before signing, not discovered after the tanks fail to fit through the door.
| What to check | Who decides | What to see before signing |
|---|---|---|
| Manufacturer's licence | AGCO (Manufacturer's Licence — Brewery class) | Licensed entity matches the tenant |
| Retail and drinking formats | AGCO endorsements and liquor sales licence | Each format on the list matched to an endorsement status |
| Zoning | The municipality where the unit sits | Written confirmation layer by layer: production, retail, drinking |
| Drainage and premises | Municipal sewer-use by-law and building review | Discharge requirements, pretreatment, load and height |
Three common misunderstandings
1. “With a brewery licence, they can sell beer at the plant and open a bar.” The manufacturer's licence covers production and wholesale. On-site retail needs its retail authorization, by-the-glass service needs the By-The-Glass endorsement, and a restaurant needs a tied house liquor sales licence — one piece of paper per format, and a missing one means that part of the business cannot run.
2. “It is a commercial storefront, so a few tanks of brewing are surely fine.” Brewing is a production use, and commercial zones commonly cap or condition it; conversely, in industrial zones it is the retail and drinking that get capped as accessory uses. A combined format has to be checked layer by layer — “can a brewery go here?” is not a question that produces a reliable answer.
3. “Drainage is the contractor's problem; no need to raise it at signing.” Brewery wastewater is squarely regulated by municipal sewer-use by-laws, and pretreatment and discharge approvals can decide the opening date and the budget. If responsibility and cost are not settled before signing, every added item after construction starts becomes an argument between landlord and tenant.
If you are about to lease to a craft brewery, I would do it in this order
- Get the format list first: brewing, retail, on-site drinking, restaurant — which of them, exactly — and negotiate item by item, not under the single word “brewery.”
- Check the foundation licence: confirm the Manufacturer's Licence (Brewery class) holder matches the tenant, then confirm the endorsement or liquor sales licence status of each other format.
- Obtain written zoning confirmation from the municipality using the address and the format list, layer by layer, including floor-area conditions.
- Have the tenant's equipment and engineering side confirm the hard premises conditions before signing — load, height, freight, sewer discharge and pretreatment — in writing.
- Write licence milestones into the lease timetable, tie commencement and fit-out spending to the key endorsements, place discharge compliance on the tenant, and have an Ontario commercial leasing lawyer review the clauses, verifying licence detail with the AGCO.
I am Ming Ren. If you are leasing out a commercial unit, bring the format list and the licence documents first, and we will go through them line by line, on the documents.
This article is general information, not legal advice. A specific address's zoning, the format mix and individual lease terms affect the conclusion. Consult an Ontario lawyer before signing, and confirm current requirements with the AGCO and the municipality.
Primary sources: AGCO licence structure under the Liquor Licence and Control Act, 2019 (Manufacturer's Licence — Brewery class; By-The-Glass, Retail Store, Tied House and Brew Pub endorsements and classes) and O. Reg. 746/21 (Ontario e-Laws) (checked November 2026).


