I am Ming Ren, a Broker with RE/MAX Realtron.
The plain answer first: finding asbestos-containing material in an older home does not make the home unbuyable or unlivable. The hazard is the fibres released when material is cut, sanded, or demolished; intact material that nobody disturbs is a different risk picture. The real dividing line is renovation and demolition. Ontario Regulation 278/05 is explicit: before an owner arranges demolition, alteration, or repair work that will disturb material that may contain asbestos, the owner must have the material examined, produce a written report, and give that report to prospective constructors. Reverse the order — demolish first, ask later — and stop-work consequences, penalties, and claims from exposed workers can all follow.
1. Where asbestos hides, and why your eyes cannot settle it
Asbestos was used heavily in building materials for its heat resistance and durability. In older homes the common hiding places include insulation on boilers and heating pipes, vermiculite insulation in attics, older vinyl floor tiles and the black mastic under them, drywall joint compound, textured "popcorn" ceiling coatings, and some exterior and roofing materials. That list can raise a suspicion; it cannot confirm anything. Materials of the same era and the same appearance may or may not contain asbestos — only sampling by a qualified person and laboratory analysis settles the question. When you see these materials on a showing, the right move is to note them on the due-diligence list, not to declare on the spot that the home "has asbestos" or "doesn't."
Age is a clue, not a verdict. The older the home, the higher the chance some material contains asbestos — but an older home may already have been remediated, or may have had materials replaced in sections. Cutting by year alone gets it wrong in both directions.
2. What the regulation requires the owner to do before work starts
Section 10 of O. Reg. 278/05 gives the owner a three-step duty. Step one, examine: before requesting tenders for demolition, alteration, or repair — or, where no tenders are requested, before arranging or contracting for the work — the owner must have an examination carried out in accordance with section 3 to establish whether material that is likely to be handled, disturbed, or removed, friable or non-friable, is asbestos-containing. No examination is needed if the owner already knows the answer, or if the work is arranged on the basis that the material is asbestos. Step two, report: the results go into a written report stating whether the material is asbestos, its condition, and whether it is friable or non-friable, with drawings or descriptions showing where it is. Step three, deliver: the owner must give the complete report to every prospective constructor, so pricing and work planning start from the truth.
Two boundaries are worth knowing. First, scope: subsection 2(4) excludes from this Regulation an owner's own private residence occupied by the owner or family, and a residential building of not more than four dwelling units where one unit is occupied by the registered owner or their family. Being outside the Regulation is not the same as the material being safe — an owner renovating their own home still has every practical reason to protect family and workers the same way. Second, the layer above: section 30 of the Occupational Health and Safety Act requires an owner, before a project begins, to determine whether designated substances — asbestos is one — are present at the site, prepare a list, and provide it to the constructor; an owner who omits a substance they ought reasonably to have known about is liable for losses the constructor and contractors suffer when it is discovered later. "Check first, and hand it over in writing" is the owner's legal duty, not a contractor's upsell.
3. After the report: work is classified, and classification is the budget
Regulation 278/05 sorts asbestos work into Type 1, Type 2, and Type 3 operations by the material, its friability, the quantity involved, and the method used, with protective requirements rising at each level — from wet methods, protective equipment, and sealed waste disposal at the lower end to enclosures, negative air, and formal clearance procedures at the top. For an owner, the classification is the budget: a small amount of non-friable material handled under a lower-type procedure and a large area of friable insulation removed under Type 3 procedures are different worlds in cost and schedule. Until you hold a test report and a classification opinion, any "removal will cost about X" quote is a number without a foundation.
If you are not renovating, intact asbestos material can generally be left in place, documented, and left undisturbed — no drilling, no sanding — with its location passed to everyone who will ever work in the home. Whether to leave or remove depends on the material's condition and your future renovation plans; get the options from a qualified assessor working from the report, not from panic.
Three misunderstandings I hear most often
"Asbestos was found, so the house is finished — sell it cheap or tear it all out now." Risk depends on the material's condition and whether it is disturbed. Intact material can lawfully be kept and managed, and blind demolition can release the very fibres you are worried about. Assess first, then decide.
"Renovation is the contractor's business; checking is their job." Section 10 puts the pre-work examination, report, and delivery duties on the owner. Contractors price and protect based on the report you give them; if work starts without one, the first link in the liability chain is you.
"You can tell by looking. Testing is a waste of money." Appearance supports suspicion only. Confirmation takes sampling and laboratory analysis — or the regulation's other route: treat the material as asbestos and work to the matching procedures.
If you own or are looking at an older home, work in this order
- On a showing, note suspect materials item by item — pipe insulation, attic insulation, floor tiles, textured ceilings — with location and condition, and do not disturb anything.
- If renovation or demolition is planned, have a qualified assessor sample and test before you sign a construction contract, and obtain the written report section 10 requires.
- Give the complete report to every contractor quoting the work, and have the protection level and removal scope written into the quote and contract.
- If you are not renovating, turn known and suspected locations into a written home record for your family and any future workers, so nothing gets drilled or sanded by accident.
- If a showing reveals extensive suspect friable material, write testing into the offer as a condition — get the report before you settle price and proceed.
Ming Ren, Broker, RE/MAX Realtron. With asbestos, the danger is not that it is there. It is starting work without knowing where it is.
This article is general information, not legal or health advice. Examinations and work classification for a specific project should be carried out by qualified professionals under O. Reg. 278/05.
Primary sources: O. Reg. 278/05, ss.2, 10; Occupational Health and Safety Act, s.30 (Ontario e-Laws, checked November 2026).
Frequently asked questions
If asbestos is found, is the house finished — should I sell it cheap or tear it all out?
Risk depends on the material's condition and whether it is disturbed. Intact material can lawfully be kept and managed, and blind demolition can release the fibres you are worried about, so assess first, then decide.
Is checking for asbestos before a renovation the contractor's job?
No. Section 10 of O. Reg. 278/05 puts the pre-work examination, report and delivery duties on the owner; contractors price and protect based on the report you give them.
Can you tell asbestos just by looking, without testing?
Appearance supports suspicion only. Confirmation takes sampling and laboratory analysis — or treating the material as asbestos and working to the matching procedures.


