Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Condos

How to Read Toronto Condo Active Listings: Start With the Few Units You Would Actually Buy

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Condos · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: a large number of active listings does not mean the unit you want should be cheap, and a small number does not mean you must rush and pay up. What actually helps you price an offer is never one citywide figure. It is the small group of listings closest to your target — the same building, the same type of layout, a similar size and exposure — and what they are asking, how long they have been sitting, how often the price has moved, and what comparable units actually sold for. Understand that small group and you understand more than any market headline can tell you.

This article is about method only, and reports no current market figures. Markets change every month; the method does not.

1. What "active" actually counts

An active listing count is a snapshot: the units listed on MLS at one moment that have not yet sold. It is a stock at a point in time — not how many units were listed over a period, and not how many sold. Before using the number, ask three questions: as of what date, over what area, and for what type of unit?

Change the boundaries and the conclusion changes. All condos across Toronto added together is a different question from the one building you want to live in. One-bedrooms, two-bedrooms and three-bedrooms mixed together is a different question from two-bedrooms alone. Condo apartments and condo townhouses, older buildings and new ones, do not draw the same buyers. So I never start with the total. I narrow the scope first to your real choices — the buildings you would genuinely buy in, and the layout you can genuinely live in. The handful of units left after that narrowing is your real negotiating reference.

One more point that is easy to miss: a unit that is taken off the market and listed again can appear as a fresh record. Counting records instead of homes can double-count that unit, and can make a long-tested unit look newly listed. Count the homes, not just the records.

2. Compare only the same building and layout — then read the listing history

Condos are the easiest property type to compare, because layouts repeat within a building. My order of comparison is: first the same building and the same layout, ideally the same stack and exposure; then similar layouts in the same building; only then nearby buildings of similar character. Floor, exposure, view, condition and maintenance fees can separate two units that look identical on paper, and the further away a comparison sits, the faster its usefulness fades.

Once the comparisons are chosen, read each listing's history. Two things matter most: days on market and price changes.

Days on market describes the current listing — how long this listing has run — not how long the home has been trying to sell in total. A unit that was withdrawn and later relisted starts the count again and can look new while having been tested by the market for much longer. So do not rely on the days shown on the current record alone. String the home's listings together: how many times it has been listed, how long each attempt ran, and whether any expired or were terminated. Only then do you know how long the seller has really been waiting.

Price changes speak even more directly. Each change is the seller responding to the market: a period without a result, followed by a lower ask, means the earlier ask was not accepted by buyers. Read how many changes there were, how far apart they came, and how large each step was. A change soon after listing means something different from one after a long wait, and several small steps tell a different story from one decisive move. But a price change still cannot tell you what a unit is worth. Worth comes from recent comparable sales, checked every time.

An invented example, with figures made up purely to show the arithmetic: suppose a unit has an invented list price of $600,000 and the most recent invented sale of the same layout in the same building was $570,000. What matters is not how many units are listed citywide. It is that $30,000 gap, and how long the sold unit sat, and how many times its price moved, before it sold.

3. List price is an asking strategy, and months of inventory is a rough calculation

A list price is what a seller chooses to ask. It is a strategy, not a valuation. A seller can price close to the expected sale price, price high and leave room to negotiate, or price low to draw more attention. Each approach is a plan; none of them tells you what the home is worth. So do not judge value by subtracting one list price from another. Judge it against sale prices: your offer should rest on what similar units recently sold for, adjusted for floor, exposure and condition.

For a rough feel of one small segment, you can estimate months of inventory — in plain terms, how long the current supply would take to sell at the recent pace. In words, the calculation is: take the number of units still for sale at a point in time, and divide it by the average number of sales per month over a recent period. The result is roughly how many months the supply would last. An invented example: if a building had an invented 12 units for sale and an invented average of 3 sales a month, the rough result is about 4 months of inventory. A larger result means slower selling and more choice for buyers; a smaller one means faster selling. But it is a blunt measure: the area you draw and the sales period you choose both move it, and in a small segment one or two extra sales can swing it sharply. Use it to sense the temperature, never as a pricing formula.

Put together, the offer logic is this: use comparable sales to set a price range you can defend, read the target unit's own history — its true total time on the market and its price changes — to judge whether the ask has softened and by how much, and only then use the small segment's inventory and pace to decide how patiently you can negotiate and what conditions you can keep. Keep that order. Specific evidence about one home first; the wider feel of the market second.

Common misunderstandings

"Active listings went up, so prices must fall." The total is a snapshot of supply. It can rise because more units were listed, because selling slowed, or simply because of the season. It is a prompt to look closer, not a conclusion — and it cannot price the one unit in front of you.

"This unit has only been listed a few days, so it must be fresh." The days on the current record are not the home's total time on the market. Check for an earlier listing that was withdrawn or ended before you call it new.

"The seller already cut the price, so this must be the bottom." A cut only shows the earlier ask was not accepted. Whether the new ask is fair still has to be checked against comparable sales.

"It is listed lower than its neighbour, so it is the cheaper buy." A low list price can simply be a strategy to attract attention. Cheap or expensive is decided by sale prices and the unit's own condition, not by who wrote the lower ask.

Before you offer, work through this list in order

  1. Fix your real scope first: which buildings, which layout, and your bottom line on size and exposure. Listings outside that scope do not count, however many there are.
  2. List every unit for sale inside that scope, merging any relisted unit into a single entry so nothing is counted twice.
  3. Pull the full listing history for each unit: total time on the market strung together, and every price change with its date and size.
  4. Find the most recent sales of the same layout in the same building, and adjust for floor, exposure, view and condition to set the price range that will anchor your offer.
  5. Roughly estimate months of inventory for your small segment only, and use it to judge negotiating pace — not to calculate a price.
  6. When you offer, show your working: which sales you relied on, how long the target has really been listed, and how its price has moved — then set price and conditions together.

Trust Professional, Diligent Work. I am Ming Ren. Do not let one big number carry your decision. Pull the records for the few units you would actually buy, and we will go through them one by one.


This article is general information only, not investment or transaction advice. Listing and sale records for a specific unit should be checked against MLS data at the time of your search, and any offer should reflect the circumstances of that case.

Primary source: the general method for reading TRREB MLS® listing and sale records (organized November 2026). The $600,000, $570,000, 12-units-for-sale and 3-sales-a-month figures are invented illustrations, not real listings or market data.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation