I am Ming Ren, a Broker with RE/MAX Realtron.
The plain conclusion first: in Toronto, a sign carrying your own store's name — a first party sign — generally needs a City sign permit before it goes up. Even the cheapest-looking move, keeping the old sign box and swapping the face for your name, is a modification of a sign and sits inside the permit system. The one permit-free route shops actually use is the window sign, and it has a hard percentage cap. Below I separate the City's line from the lease's line — the sign is only secure when both are satisfied.
The City's line: how Chapter 694 works
Toronto's sign rules live in Chapter 694 of the Municipal Code. The structure is permit-first: §694-5 requires a sign permit from the Chief Building Official before a sign is erected, displayed, modified or restored; §694-6 lists the exemptions; and §694-8 warns that a sign permit covers the sign only — it is not a building permit, so structure and attachment can still be a separate approval.
The exemption a new storefront uses most is the window sign. Under §694-6, outside the R and RA sign districts, a first party window sign needs no permit when all of these hold at once:
| Condition | Requirement |
|---|---|
| Area | All window signs together take no more than 25% of the window area, excluding the frame |
| Location | Not above the second storey |
| Content and form | First party copy only; electronic copy such as LED is outside this exemption |
Miss any one of them and you are back in the permit stream; a sign that does not fit the size and location rules for its sign district may need a sign variance first. So the order of work is: measure the window, test the conditions, then order the lettering.
One more step waits inside the application: the City's sign permit application calls for authorization from the property owner. A tenant cannot complete the City's line without the landlord — which leads straight to the lease.
The lease's line: four things the sign clause should say
The City decides whether a sign may go up. The lease decides how that plays out between landlord and tenant. In a commercial lease I want the sign clause to settle four things:
- Approval before ordering: sign design, size, location and illumination go to the landlord for confirmation before the tenant orders or applies — matching the owner-authorization step in the City's application.
- Who applies and who pays: normally the tenant applies and pays; say so, and say what happens if the permit is refused — redesign, or a right to end the deal — rather than arguing after the sign is built.
- Old signs and the wall: reusing an old sign box, drilling fixings, and the state of the wall when the sign comes down at the end of the term, all written in advance.
- Non-compliance: if a sign goes up without a permit or oversize and the City orders changes or lays charges, the cost and the fix are the tenant's, with a deadline to act once the landlord forwards a notice.
Three common misunderstandings
1. "The sign box came with the unit; I am only changing the face, so it is not a new sign." The by-law governs erecting, displaying, modifying and restoring signs. A new face with a new name is a modification, and the previous tenant's permit does not transfer to your business.
2. "Window decals are just stickers, not signs." A window sign is a defined sign type in Chapter 694. It simply has the 25% permit-free route; exceed the area, go above the second storey, or use electronic display and you are back to needing a permit.
3. "Once the sign permit issues, construction is my own business." Section 694-8 says a sign permit is not a building permit. Where structure and attachment are involved, ask Toronto Building whether anything further is needed before the work starts.
My checklist before opening day
- Confirm which sign district the unit is in, then test your sign against the §694-6 exemptions.
- Measure the window signs yourself: total area against window area, floor level, electronic or not — all three must fit to use the exemption.
- If a permit is needed, have the tenant send the sign proposal (size, location, illumination) to the landlord first, get the owner's authorization, then file the sign permit application.
- Write approval, application cost, old-sign handling and non-compliance responsibility into the lease before the tenant orders anything.
- Install only after the permit issues, and confirm with Toronto Building whether the installation needs anything further.
Honest in conduct, diligent in work — that is how I run my practice. I am Ming Ren. Ten minutes on the sign clause at signing saves three trips to City Hall at opening. Send me a photo and the dimensions of a sign you are unsure about and we will test it against the by-law first.
This article is general information, not legal advice. Sign permit and variance decisions rest on the current text of Chapter 694 and the review of the specific property; confirm with the City of Toronto and an Ontario lawyer before proceeding.
Primary sources: Toronto Municipal Code Chapter 694, Signs, General, ss.694-5, 694-6 and 694-8; City of Toronto sign permit information pages (toronto.ca, checked November 2026).


