Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Buying a Home

Screen the floor plan before you book the showing: save the trip for homes that can work

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Buying a Home · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

Here is the conclusion first: a floor plan will not let you buy a home from your kitchen table, and that is not its job. Its job is to rule out the homes that clearly cannot work for you. If your bed does not fit on paper, if the route through the home is awkward, or if a main room has no window, a showing will rarely change that answer. Spend twenty minutes on the plan first, then book showings only for the homes that pass.

First: ask how the area was measured — do not compare one headline number

The same home often shows different areas in different documents. That does not automatically mean someone invented a number. More often, the measurements were taken for different purposes: one figure may cover only the area above grade, another may include a finished basement; a condo figure may come from the builder's plan or from a later measurement. MPAC also keeps its own area records for assessment, and an assessment basis is not the same thing as a listing basis, so a difference alone does not prove either figure wrong.

Do three things when you read the plan. First, look for area broken down by level — main floor, upper floor and basement separately — instead of relying on a single total. Second, check whether the basement and garage are included in that total, and pull them out before you compare. Third, compare the plan against the MLS information and the MPAC record, write down any gap, and ask the listing brokerage about it at the showing instead of guessing.

An example with invented numbers only: one home is listed at 2,400 square feet (example number), split into 1,700 above grade and 700 in the basement (example numbers). Another is listed at 2,100 square feet (example number), all above grade. Compare only the totals and the first home looks larger. Compare the space you will live in every day and the answer may reverse. Split the area before you judge it.

Second: test-fit your own furniture on the plan

The easiest thing to misread on a plan is a room with no dimensions. A bedroom can look square and generous until you ask whether your bed, nightstands and wardrobe actually fit. My method is plain but it works: measure the large furniture you already own, keep the list beside you, and place each piece on the plan to scale.

Measure this first Check this on the plan
Bed length and width How much walking space is left on both sides and at the foot
Sofa and dining table Whether the living and dining areas still leave a clear path through
Wardrobe and desk Whether a wall is long enough, without being cut up by a door or window

Using example numbers only: a primary bedroom is marked 3.3 metres by 3.6 metres (example numbers) and your bed is 1.9 metres wide by 2.1 metres long (example numbers). Scale it on the plan and you can see at once how tight the sides will be. Be extra careful with a room that shows area but no length and width — a long, narrow room and a square room with the same area hold very different furniture.

Check two more things while you are there. Note which way each door swings, and whether an open door would block a wardrobe or hit a vanity; that is drawn on the plan. Note columns and pipe chases too, which are common in condos. One sitting in the middle of a room or cutting off a corner will fight your furniture every day, and you can spot it on paper without a trip.

Third: walk your daily life across the plan, then check the windows

Lay the plan out and picture three moments. In the morning, everyone is washing up and leaving at the same time — are there enough bathrooms, or does everyone jam into one hallway? In the evening, you come in from the garage or the front door carrying groceries — how far is the kitchen, and do you have to loop through the living room to get there? In winter, wet boots and heavy coats come through the door — is there anywhere to put them, or do they end up beside the dining table? A home that fails these three walks on paper will annoy you once a day, every day, once you move in.

Then look at the windows. Find the north arrow first and work out which way the living room and primary bedroom face. Then check, room by room, whether each main room has a window and on which wall. Treat any windowless room with a question mark, whatever it is called in conversation. The Ontario Building Code sets requirements for light, ventilation and emergency exits from living spaces, and whether a windowless basement room can properly count as a bedroom depends on the specifics — do not take a sales label as the answer. Orientation also needs a reality check: a south-facing window tight against another building can still be dark. A plan cannot settle that, so leave light and obstruction for the showing itself.

Give the kitchen one extra look: is there a window or an exhaust path near the stove, and does the run between fridge, stove and sink make sense? A household that cooks every day walks those steps dozens of times. Awkward on paper means more awkward in life.

Three common misunderstandings

1. "A bigger area number means a bigger home." Not necessarily. Check the basis first: are the basement and garage included, and which levels were measured? If you cannot split the number apart, ask before you compare — never compare two totals measured on different bases as if they were the same thing.

2. "The plan shows a bed in the room, so the room is big enough." Furniture drawn on marketing plans is often illustrative and not to real scale. Judge a room only by its marked dimensions, tested against the actual size of your own furniture — not by the small bed in the drawing.

3. "Close the door on a windowless room and it is a bedroom." It does not work that way. A window is about light and ventilation, and about getting out in an emergency. A listing can call a home's bedroom count one thing; whether a room meets the rules and can be lived in long-term is a separate question. If you are unsure, get an inspector's view or check with the municipality before you rely on it.

Before you book a showing, go through the plan in this order

  1. Write down the area level by level — above grade, basement and garage separately — and treat the headline total as a reference only.
  2. Compare the plan area with the MLS information and the MPAC record, and list every gap to ask about in person.
  3. Measure your bed, sofa, dining table and wardrobe, place them on the plan to scale, and rule out any home where they do not fit.
  4. Check which way each door swings and where the columns and pipe chases sit, so furniture is not blocked before you start.
  5. Walk three routes on the plan: the morning wash-up and exit, the evening trip from the door to the kitchen with groceries, and the winter entry with boots and coats.
  6. Find the north arrow and confirm the windows and facing of each room; mark every windowless room separately instead of assuming it is a bedroom.
  7. Book showings only for the two or three homes that pass on paper, and use the visit to verify what the plan cannot settle: light, obstruction and true measurements.

Work honestly, work diligently. I am Ming Ren. If you are holding floor plans for a few homes and cannot decide, send them to me — we will screen them on paper first, one by one, and save the showings for homes that can actually work for you.


This article is general information only, not legal advice and not a professional opinion on building-code compliance. Whether a room complies with the Ontario Building Code or municipal zoning should be confirmed with a home inspector, the municipality, or an Ontario lawyer.

Primary sources: Municipal Property Assessment Corporation (MPAC) property assessment and area record information; Ontario Building Code (Ontario e-Laws); RECO Information Guide (all consulted November 2026). All areas and dimensions in this article are example numbers invented for illustration, not from a real listing.

Frequently asked questions

Does a bigger area number mean a bigger home?

Not necessarily. Check whether the basement and garage are included and which levels were measured, and never compare totals measured on different bases.

If the plan shows a bed in a room, is the room big enough?

Furniture on marketing plans is often illustrative and not to real scale; judge a room only by its marked dimensions against your own furniture.

Is a windowless room a bedroom if you close the door?

No. A window is about light, ventilation and getting out in an emergency, and whether a room meets the rules is a separate question from the listing's bedroom count.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation