Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Renting, Landlords & Tenants

Pricing a GTA Rental: Rent Is Set by Comparison, Not by Your Costs

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Renting, Landlords & Tenants · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The short answer: your rent is not set by your mortgage payment or by what you paid for the property. It is set by one thing — what the units most like yours have actually leased for recently. The method is not complicated once it is said plainly: find the right comparables, adjust for the differences line by line, and price in the cost of vacancy. Everything else is detail. This article covers principles and a checklist only, with no market figures, because an average detached from your specific unit does not help you price it.

First: anchor on comparables that actually leased, not on asking prices

Step one is finding comps — comparable rentals. I judge a comp on four dimensions only: same general area, same property type, similar size and layout, and similar features and condition. The further a unit drifts on those four, the less usable it is as a sample. A unit with parking, in-suite laundry and a fresh renovation is simply not in the same price band as a tired unit with none of those, even in the same building.

Three hard rules for using the samples. First, look at leased prices, not asking prices. An asking price is another landlord's hope; a leased price is what a tenant actually agreed to pay. Anchoring on asking prices biases your rent systematically upward. Second, keep the samples recent and numerous enough: as recent as you can get, and at least three to five of them, because one or two samples are easily skewed by outliers. Third, read a range, not a single number: several good comps naturally outline a price band, and your unit belongs somewhere inside it — exactly where is decided by the adjustments in the next section.

Historical leased records on MLS are one of the most reliable ways to check what units truly rented for; most public websites show asking prices only. If you cannot pull leased records yourself, ask an agent for a leased list for your building and street — it is worth more than any "average rent" figure.

Second: adjust for differences line by line, then price in vacancy

No comp is identical to your unit, so step two is adjustment: an extra parking spot, one bathroom fewer, a higher floor, a newer renovation, utilities included or not — each difference gets mentally converted into a plus or a minus until you reach "if this were my unit, what should it rent for?" Do not simply average the samples; averaging erases exactly the real differences between your unit and the others.

Then run the vacancy math — the step most often skipped, and the most expensive one. Here is a purely illustrative example, with assumed numbers, to show the arithmetic only: suppose comparable units actually lease at $2,000 a month. You want $100 more, which is $1,200 over a year. But if the higher price costs you just one extra vacant month, you lose a full month's rent — $2,000 — before counting the property tax, condo fees and mortgage interest that keep running while the unit sits empty. In other words, the extra money is earned only if the unit does not sit vacant, and a high price is precisely what produces vacancy. Once landlords run that math, most price near the middle of the comparable range rather than at the very top.

One more layer to think about in advance: once the starting rent is set, a unit covered by Ontario's rent increase guideline can only rise by that guideline each year (2.1% for 2026, a figure I verified on the Government of Ontario's website). A starting rent set clearly too low is hard to recover from in small annual steps. That is not an argument for pricing high — it is a reminder that the starting rent is a decision that follows you for years, and it deserves one careful round of comparison.

Third: pricing is a range plus feedback, not a number you set and forget

My practice is to set a range first, then the asking price: the bottom of the range is the lowest rent I can accept, and the asking price sits at a sensible position inside the comparable band — leaving a little room to negotiate, but no room for fantasy pricing. Features that genuinely add value — parking, in-suite laundry, a renovated kitchen or bath, good light, a workable pet arrangement — should be reflected explicitly in both the price and the listing description, not left for tenants to discover.

After listing, correct with feedback. In the first stretch on the market, the volume of showings and applications is the most honest price signal there is. If inquiries are scarce and viewers leave without applying, suspect the price before you suspect your luck. Adjust early and modestly: a small correction that brings applications back is usually cheaper than stubbornly absorbing weeks of vacancy. The reverse also teaches you something — if applications flood in, the price was probably low; keep this round's comp list on file and correct the range upward next time.

Timing is part of pricing too: where you can, arrange lease starts and ends so turnover lands in the higher-demand part of the year, rather than having a lease expire in the hardest weeks to re-rent and forcing a new price at the bottom of the market. It costs nothing — it is just looking at the calendar one step earlier.

Three common misunderstandings

Misunderstanding 1: "My mortgage, taxes and fees add up to X, so the rent has to be X." The market does not pay for your costs. Tenants compare your unit with similar units nearby, and a higher carrying cost does not make a tenant pay one dollar more. Your costs decide whether the property is worth holding — not what the rent should be.

Misunderstanding 2: "List high and drop it later; there's no downside." There is: vacancy. An empty month never comes back, and a high price also filters out applicants who would have been a good fit. Listing high and dropping later usually ends worse, in total, than starting inside a sensible range.

Misunderstanding 3: "I'll check a few websites' average rent and price to that." An average mixes different areas, different layouts, and asking with leased prices; applied to your one specific unit, it tells you almost nothing. Price only from the handful of real leased samples that look most like your unit.

To price your own unit, I suggest this order

  1. Pull a comp list: same area, same type, similar size and layout, actually leased recently — at least three to five units, and leased prices over asking prices wherever you can get them.
  2. Adjust line by line: for parking, bathrooms, floor, renovation, included utilities and pet arrangements, convert each comp into your unit's terms and derive a price range.
  3. Run the vacancy math: put "extra monthly rent times twelve" next to "one extra vacant month's rent plus carrying costs," then decide where inside the range your asking price belongs.
  4. Think through the starting rent's long tail: for a guideline-covered unit especially, a low start is hard to recover from, so set it carefully.
  5. Watch the feedback after listing: if showings and applications are clearly thin after a week or two, adjust the price rather than holding out — and keep this round's comp list on file for next time.

Trust Professional, Diligent Work. I am Ming Ren. If you have a unit to price, send me the address and layout, and we will pull a list of real leased comparables and set the rent number by number.


This article is general information, not legal or investment advice. The $2,000 and $100 figures are illustrative assumed numbers used only to show the vacancy-cost arithmetic; they are not rent levels for any area. Ontario's rent increase guideline follows the figure published by the Government of Ontario. Price your own unit from its actual leased comparables before deciding.

Primary sources: the pricing method is the author's practice checklist, and no market statistics from the original article or any other source are carried over. The rent increase guideline reference follows the Government of Ontario's Residential rent increases page (ontario.ca — 2.1% for 2026, checked November 2026) and the Residential Tenancies Act, 2006.

Frequently asked questions

My mortgage, taxes and fees add up to X, so does the rent have to be X?

The market does not pay for your costs. Tenants compare your unit with similar units nearby, and a higher carrying cost does not make a tenant pay one dollar more. Your costs decide whether the property is worth holding — not what the rent should be.

List high and drop it later — is there no downside?

There is: vacancy. An empty month never comes back, and a high price also filters out applicants who would have been a good fit. Listing high and dropping later usually ends worse, in total, than starting inside a sensible range.

Can I check a few websites' average rent and price to that?

An average mixes different areas, different layouts, and asking with leased prices; applied to your one specific unit, it tells you almost nothing. Price only from the handful of real leased samples that look most like your unit.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation