I am Ming Ren, Broker at RE/MAX Realtron.
The short answer: in Ontario, the owner or occupant of a home may do electrical work in that home without holding an electrical contractor licence. That answers only one question — who may do the work. It does not answer the other two: the work must meet the Ontario Electrical Safety Code, and a notification of work — the filing most people call an electrical permit — must be filed with the Electrical Safety Authority (ESA) before the work starts, with an ESA review once it is done. Reading "I can do it myself" as "no filing, no inspection, my own standard" is where homeowners get into trouble.
At showings I regularly see owner-done wiring in basements. When that home is sold, buyers do not usually ask who did the work; they ask whether ESA has a record of it and whether it passed. Work that went through the full process is easy to explain. Work with no record leaves only explanations. Here are the three pieces, kept separate.
1. Who may do the work is a narrower group than most people assume
The starting point is O. Reg. 570/05 under the Electricity Act, 1998, the regulation that licenses electrical contractors and master electricians. Section 3 says no person shall operate an electrical contracting business without an electrical contractor licence. Paragraph 3 of section 2 then says the regulation does not apply to work on electrical equipment or installations within a residential dwelling if done by an owner or occupant of the dwelling.
Read the structure carefully: what is switched off is the licensing regulation, so a homeowner working on their own home needs no contractor licence. The paragraph says nothing about the safety rules. And the people it names are only two: the owner, or an occupant, of that dwelling, doing the work personally.
ESA's own DIY guidance states this plainly: only you can do electrical work in your home, and friends, family members and neighbours cannot perform electrical work in your home. A skilled relative is still not the owner or occupant of your home. For tenants, ESA says a tenant may do electrical work inside their rental unit, but should check with the property manager first.
Hiring out is a different rule entirely. ESA states that in Ontario, if you hire someone to do electrical work in your home, by law it must be a Licensed Electrical Contractor (LEC). A general renovator who "knows wiring" does not become compliant by being competent. When you hire an LEC, the LEC files the notification; ask for a copy of the acceptance document for your files when the job is done.
2. How the work must be done: one Code, no homeowner discount
O. Reg. 164/99 adopts the Ontario Electrical Safety Code. Section 2 leaves no one out: every act or omission in connection with the generation, transmission, distribution, retail or use of electricity in Ontario must be done in compliance with the Electrical Safety Code. Owner-done work and contractor-done work are measured against the same Code. There is no relaxed standard for your own house.
ESA says the same thing: every installation, repair and replacement must meet the Ontario Electrical Safety Code, and before starting you should familiarize yourself with the current edition and how it relates to your project. The Code is updated every three years, and the newest edition came into effect on May 1, 2025. Old habits from an earlier panel or an earlier house may not match the current requirements; if you are not confident you can meet the Code, that is itself a signal the job belongs with an LEC.
Keep two permits apart. ESA warns that a municipal building permit is not the same as an electrical notification, and a project may need both. A basement project involving framing or partitions may require the building permit on the municipal side and the notification on the ESA side — each confirmed separately, before work starts.
3. The ESA sequence: file first, keep it open for review, keep the certificate
ESA's process runs in time order. First, before work starts: file a notification of work. ESA's words are that even for little jobs, you must file before commencing work. The person doing the work files it — you, if you do it yourself; the LEC, if you hire one. Never file on behalf of someone else. Fees vary with the complexity of the job, and ESA says the fee for many small residential projects can be less than $100; confirm the fee for your specific job with ESA.
Second, review. Get the work reviewed by ESA as soon as it is complete; complicated installations may need review at several stages. Do not conceal the work before ESA has reviewed it — wiring closed into a wall or buried before review removes the very step that confirms compliance. If the work does not comply, the inspector issues a defect notice setting out what must be corrected.
Third, the paper. Once the work has been reviewed and passed, ESA issues a Certificate of Acceptance to the person who filed the notification. ESA describes it as an important document for insurance purposes and resale — keep it with your house records. What a particular insurer would do without one depends on that policy's terms, and this article does not speak for insurers. ESA also notes that a notification creates a permanent record of the electrical work, which is exactly what a future buyer will be looking for.
An invented example to fix the order (the following is an illustrative scenario, and the numbers are illustrative figures I made up): you plan to add 2 receptacles and move 1 ceiling light in a basement — 3 points in total. The right order is not to pull the wire on Saturday and sort out the paperwork later. It is: confirm how those 3 points must be done under the current Code, file the notification with ESA before starting, do the work yourself, leave the wall open for ESA's review, and file the Certificate of Acceptance with your house records once it passes. A small job; none of the steps shrink with it.
Common misunderstandings
"It's my house, so I don't need to tell ESA." No. ESA says even little jobs require a notification of work filed before the work starts.
"My brother renovates for a living, so he can wire it." No. The people who may do the work themselves are the home's owner or occupant. ESA states friends, family members and neighbours cannot perform electrical work in your home. Anyone you hire must be an LEC.
"I have a building permit, so the electrical side is covered." No. ESA says a building permit is not an electrical notification, and a project may need both.
"Once it's inside the wall, inspection doesn't matter." The opposite: ESA says do not conceal the work before it has been reviewed.
"My own work, my own standard." No. Section 2 of O. Reg. 164/99 requires acts connected with the use of electricity to comply with the Ontario Electrical Safety Code — there is one standard.
Action checklist
- Decide first whether you are doing the work or hiring it out. Doing it yourself, confirm you are the owner or occupant of that dwelling; hiring out, use only an LEC and verify the licence.
- Before starting, review the current Ontario Electrical Safety Code provisions that apply to your project; if you cannot meet them with confidence, hand the job to an LEC.
- File a notification of work with ESA before the work starts — do not file afterwards, and never file on someone else's behalf.
- Separate the municipal building permit from the electrical notification; if the project needs both, arrange both.
- Keep the work open — do not conceal or bury it before ESA's review; if you receive a defect notice, correct what it lists.
- Once the work passes, obtain the Certificate of Acceptance and keep it with your title and tax records, ready to produce when you sell.
- Tenants: check with the property manager first, then follow the same filing and review steps.
Ming Ren, Broker, RE/MAX Realtron
General information only, not legal advice and not an electrical how-to guide. Whether a specific project complies is determined by the Ontario Electrical Safety Code and ESA's review; confirm with ESA or a Licensed Electrical Contractor before acting.
Primary sources: O. Reg. 570/05, ss.2-3; O. Reg. 164/99, ss.1-2 (Ontario e-Laws, checked November 2026); Electrical Safety Authority, "Do-It-Yourself (DIY) Electrical Work" and "Notifications and Inspections" (esasafe.com, checked November 2026).


