Ming RenBroker · RE/MAX Realtron Realty Inc., Brokerage
☎ 647-779-9186

Renting, Landlords & Tenants

How a 5+ Unit Rental Gets to 95% Financing: CMHC MLI Select and Its Points System, Explained

By , Broker, RE/MAX Realtron Realty Inc. (About Ming) · Published

Ming Ren · Broker · RE/MAX Realtron Realty Inc., Brokerage

← All articles · Renting, Landlords & Tenants · Category guide

I am Ming Ren, a Broker with RE/MAX Realtron.

The plain conclusion first: MLI Select is not an "easier" loan. It is a trade. You give CMHC real commitments on affordability, energy efficiency and accessibility, and in return you get a higher loan-to-value or loan-to-cost ratio, a longer amortization, and a discount on the insurance premium. The more points you earn, the better the terms. The entry conditions are equally plain: at least 5 residential units, at least 50 points to qualify at all, and an affordability commitment that runs a minimum of ten years. Whether it fits your deal is a question you can only answer after you understand the points table.

What this product is

MLI Select is Canada Mortgage and Housing Corporation's mortgage loan insurance product for multi-unit rental properties, covering both new construction and existing properties: standard rental housing, single room occupancy (SRO), supportive housing and retirement homes. The minimum project size is 5 units — except retirement homes, which require a minimum of 50 units or beds. Student housing can only earn points under energy efficiency and accessibility, not affordability.

A borrower may commit to any combination of the three social outcomes — affordability, energy efficiency and accessibility — but needs a minimum total of 50 points to qualify for MLI Select. The non-residential component is capped: no more than 30% of gross floor area and no more than 30% of total lending value, and the loan on the non-residential component cannot exceed 75% of that component's lending value.

How the points are earned

Outcome How points are scored (key figures) Maximum
Affordability — new construction Units with rent at or below 30% of median renter income: 10% of units = 50 points, 15% = 70 points, 25% = 100 points 100 points
Affordability — existing properties Same rent threshold: 40% of units = 50 points, 60% = 70 points, 80% = 100 points 100 points
Energy efficiency New construction scored in three levels (20 / 35 / 50 points) on improvement over NECB Tier 1 or NBC Tier 1 baselines; existing properties scored on reductions of 15% / 25% / 40% against current baseline levels 50 points
Accessibility All units must be 100% visitable under CSA standard B651:23 and common areas barrier-free; two levels above that base, at 20 and 30 points 30 points

Two details deserve attention. First, the affordability commitment must be maintained for a minimum of 10 years from first occupancy, with documentation required to support ongoing compliance throughout that period — and committing for 20 or more years earns an additional 30 points. Second, energy efficiency tops out at 50 points and accessibility at 30, so those two together reach only 80: affordability is the only single path to 100 points, though combining all three can get you there too. And unlike affordability, the energy and accessibility criteria, once achieved and documented, do not need to be demonstrated annually — the commitment is considered fulfilled.

What each tier buys you

Total points New construction: max loan-to-cost Existing: max loan-to-value Max amortization Recourse Premium discount
50 points 95% 85% 40 years Full 10%
70 points 95% 95% 45 years Full 20%
100 points 95% 95% 50 years Limited 30%

The cell most people misread is the existing-properties column: at 50 points an existing property is capped at 85%, and the 95% level only opens up at 70 points, while new construction sits at 95% at every tier. Amortization carries a hidden cap as well — it cannot exceed the property's remaining economic life, as determined by CMHC. The premium discount, set out in CMHC's multi-unit fees and premiums sheet, applies to the base premium plus any applicable surcharges. And there is a hard underwriting floor beneath all of it: minimum debt coverage ratio of 1.10 for standard rental, 1.20 for other shelter models, and 1.40 for non-residential space. If the cash flow does not clear that bar, the points do not matter.

An invented example, purely to show the size of the gap: take an existing property valued at $8 million. At the 50-point tier the maximum loan is $6.8 million; at 70 points it is $7.6 million. Same building, an $800,000 difference in available financing — which is why this planning belongs before you buy, not after you close.

The borrower has to qualify too: the borrower or an affiliated corporation needs at least five years of demonstrated management experience with similar multi-unit properties, or a formal contract with a professional third-party property management firm. Net worth must be at least 25% of the loan amount requested, with a minimum of $100,000 — though for applications scoring 100 points or more, CMHC may permit some flexibility on net worth.

The advancing and documentation timelines are worth knowing up front as well. On new construction, the loan may be advanced up to 95% of costs during construction, but a rental achievement holdback may apply — part of the money held back until projected rents are actually achieved. Where insured financing funds the energy or accessibility work, documentation confirming achievement is due within 60 days after the last advance; where the borrower completed the work with their own resources or non-insured financing, that window stretches to 24 months after the last advance. Affordability runs on a different logic: compliance documentation is required throughout the entire affordability period, starting at first occupancy — not filed once and forgotten.

One last caution, straight from CMHC's own sheet: the information is subject to change at any time, and you should verify with CMHC that you have the most up-to-date information before the loan is processed. This article follows the product sheet revised October 29, 2025, and the current fees and premiums sheet — check both again when you actually apply.

Three misunderstandings I hear most often

"My four-unit building can use this." It cannot. The floor is 5 residential units, and retirement homes start at 50 units or beds. Rental properties of one to four units are insured under different rules.

"An existing property with 50 points gets 95% financing." It gets 85%. The 95% level for existing properties starts at 70 points. Run a 50-point deal on a 95% assumption and your cash-flow math is wrong from the first line.

"Hit the points and the loan is approved." Points are the entry ticket, not the approval. Debt coverage, borrower experience and net worth, and the non-residential caps are each tested on their own. And the affordability commitment is not a signature you forget — it is a ten-year-minimum obligation with ongoing compliance documentation, so price the cost of keeping it before you volunteer for it.

If you are considering MLI Select, do these five things in order

  1. Count units first: does the property have at least 5 residential units, and is the non-residential component within 30% of both floor area and lending value? If not, stop here.
  2. Score the points honestly: for new construction or an existing property, work out what affordability, energy efficiency and accessibility can each realistically deliver, and pick a target tier — 50, 70 or 100.
  3. Price the commitment: affordable units are capped at rents of 30% of median renter income, locked in for ten years or more. Put the rent you give up on the same page as the extra borrowing room and the premium you save.
  4. Test the debt coverage ratio on the property's actual income and expenses before applying: 1.10 is the floor for standard rental. If it does not clear, fix the plan first, not the application.
  5. Confirm the current numbers with a mortgage professional who works in multi-unit financing, or directly with CMHC — product sheet and premium schedule — before you submit anything.

Trust Professional, Diligent Work. I am Ming Ren. On a multi-unit rental purchase or refinance, get the points table and the cash-flow table right first, and then we can talk about whether the deal is worth doing.


This article is general information only, not mortgage, financial or legal advice. CMHC's product terms and premiums can change at any time, and approval depends on the specific borrower and property. Verify current terms with CMHC or a licensed mortgage professional before applying.

Primary sources: CMHC MLI Select product sheet (66792, revised October 29, 2025) and CMHC Multi-unit Fees and Premiums sheet (cmhc-schl.gc.ca, consulted November 2026). The $8 million value and $6.8 million / $7.6 million loan figures are illustrative only, not a real case.

Frequently asked questions

Can my four-unit building use MLI Select?

It cannot. The floor is 5 residential units, and retirement homes start at 50 units or beds. Rental properties of one to four units are insured under different rules.

Does an existing property with 50 points get 95% financing?

It gets 85%. The 95% level for existing properties starts at 70 points, so running a 50-point deal on a 95% assumption makes your cash-flow math wrong from the first line.

Hit the points and the loan is approved?

Points are the entry ticket, not the approval. Debt coverage, borrower experience and net worth, and the non-residential caps are each tested on their own, and the affordability commitment is a ten-year-minimum obligation with ongoing compliance documentation.

This article in other languages: 中文فارسی

Want to talk about your home?

You can also call directly, or scan the code to add Ming on WeChat.

Ming’s WeChat QR code
Scan to add on WeChat

Community guides by city

All cities →
☎ Call MingFree Evaluation