I am Ming Ren, a Broker with RE/MAX Realtron.
The plain conclusion first: no Ontario rule says you must test the well or inspect the septic before you sell a rural home. Listing the property creates no new testing duty. But three responsibilities were already yours as owner: maintaining the well and properly abandoning any disused well, keeping the septic system within the building rules that govern it, and not concealing a serious hidden problem you actually know about. The buyer's inspections are the buyer's diligence; your compliance is your own file. Do not confuse the two.
This article covers which rules govern the well, which govern the septic, and where the disclosure line actually sits.
First: wells are governed by Reg. 903, and the duties do not wait for a sale
Wells in Ontario are regulated under R.R.O. 1990, Reg. 903 (Wells), made under the Ontario Water Resources Act. Under section 20, the well owner must maintain the well so that surface water and other foreign materials cannot enter it, and a casing that stands at least 40 cm above ground must not be reduced below that height. Under section 21, a well that is not being used and is not being maintained for future use must be abandoned — properly plugged and sealed — forthwith.
Note who carries these duties: the well owner, meaning the owner of the land. They run with ownership, whether or not the property is for sale. An old, unsealed, disused well is the current owner's unfinished business under Reg. 903. It does not become the buyer's problem by magic on closing — in practice, once the buyer's inspection finds it, it becomes a negotiation and closing problem for the seller. So the most useful pre-listing step is not rushing out a water test; it is knowing how many wells are on your land, which are in use, which are disused and unsealed, and gathering every well record you can find.
Drinking-water quality testing is a different matter. That is usually a condition the buyer puts in the offer. A seller has no general statutory duty to send a sample before listing. Testing voluntarily is allowed — but think first: a bad result turns an unknown into a known, and what you then do about it, and disclose, should be settled with your lawyer before the sample is taken, not after.
Second: septic systems sit under the Building Code, and the question is compliance
A septic system is not governed by the wells regulation. On-site sewage systems with a design capacity of 10,000 litres per day or less are regulated under the Building Code Act, 1992 and Part 8 of the Ontario Building Code: building or altering such a system requires a permit, and design, construction and maintenance must meet the Code. Permit and inspection records are generally held by the municipal building department or the local body that administers the program.
For a seller, two practical consequences follow. First, paperwork is value: when the system was installed, whether it was permitted, and when it was last pumped and inspected are facts a buyer will pay attention to — assemble them early. Second, a system that is plainly failing — surfacing effluent, odours, drainage that clearly does not work — is not an ordinary cosmetic flaw to leave for the buyer to find. It can raise both compliance questions and the disclosure question below. If repair or replacement is needed, find out which office issues the permit and what the work roughly costs before you set a listing strategy, not across the negotiating table.
Third: disclosure turns on known, hidden and serious
Ontario resale law starts from caveat emptor — buyer beware. For patent defects, the ones a reasonable inspection can see, a seller generally need not point them out, but must not conceal them. Latent defects are different. As RECO's guidance on sellers' disclosure obligations (Bulletin 7.4, summarizing the case law) puts it, a latent defect the seller knows about, which is not apparent on a reasonable inspection and which makes the property unfit for habitation or dangerous, must be disclosed.
Applied to wells and septic systems, that is concrete: you know the old well was never sealed; you know the septic has failed and the evidence was graded over. Those are exactly the matters to disclose, or at minimum to work through carefully with your lawyer. The opposite is equally true: a system condition you genuinely do not know about does not oblige you to commission the buyer's inspection for them. And while a Seller Property Information Statement is not mandatory in Ontario, every answer on one you do complete must be truthful — ticking "unknown" beside the well or septic question when you do know is planting a problem for yourself.
| Item | Governing rules | The seller's practical job |
|---|---|---|
| Maintaining a working well; casing height | Reg. 903, s.20 | Keep the wellhead sound; keep surface water out |
| A disused well | Reg. 903, s.21 | Abandon it properly and keep the records |
| Septic construction, alteration, permits | Building Code Act; Building Code Part 8 | Keep permits, pumping and inspection records |
| A known, serious hidden problem | Case-law disclosure duty (summarized in RECO Bulletin 7.4) | Disclose honestly; do not conceal; ask a lawyer when unsure |
Three common misunderstandings
One: "The law makes me test the well and septic before I can sell." There is no such blanket rule. Testing is normally the buyer's condition in an offer; the seller's legal duties are the ongoing well and septic compliance described above.
Two: "The next owner takes the property as it is, so old problems are not mine." An unsealed disused well is the current well owner's duty under Reg. 903. It does not evaporate at listing — it resurfaces as a price and timing problem when the buyer finds it.
Three: "If I stay silent and the buyer cannot find it, it is not my problem." A known, serious defect that an inspection cannot reveal is precisely what the disclosure duty targets. Concealment hurts a seller more than the defect itself.
If you are preparing to sell a home on a well and septic, I suggest this order
- Inventory the wells: how many, which are in use, which are disused, whether disused wells were abandoned under Reg. 903, and every well record you can locate.
- Assemble the septic file: permit year, most recent pumping and inspection receipts; request missing records from the municipality or administering body.
- If a system has a known failure, get a rough repair or replacement figure and the permit route first, then decide: repair before selling, or disclose and sell as it stands.
- If you want your own water test, agree with your lawyer first on how a bad result will be handled and disclosed.
- On any property information form, state only facts you can stand behind; verify rather than guess.
Honest in conduct, diligent in work. I am Ming Ren. A rural sale is not about luck — it is about complete files and clear obligations.
This article is general information, not legal advice. Your agreement, title registration and individual facts will affect the answer, so consult an Ontario lawyer before acting.
Primary sources: R.R.O. 1990, Reg. 903 (Wells), ss.20, 21, under the Ontario Water Resources Act, R.S.O. 1990, c. O.40; Building Code Act, 1992, S.O. 1992, c.23 and Ontario Building Code Part 8; RECO Bulletin 7.4 summarizing seller disclosure obligations (Ontario e-Laws and RECO, consulted November 2026).
Frequently asked questions
Does the law make me test the well and septic before I can sell?
There is no such blanket rule. Testing is normally the buyer's condition in an offer; the seller's legal duties are the ongoing well and septic compliance described in the article.
The next owner takes the property as it is, so are old problems not mine?
An unsealed disused well is the current well owner's duty under Reg. 903. It does not evaporate at listing — it resurfaces as a price and timing problem when the buyer finds it.
If I stay silent and the buyer cannot find it, is it not my problem?
A known, serious defect that an inspection cannot reveal is precisely what the disclosure duty targets. Concealment hurts a seller more than the defect itself.


