I am Ming Ren, a Broker with RE/MAX Realtron.
The conclusion first: if your land sits beside a provincial highway — a King's Highway or a controlled-access highway — full municipal approval does not mean you can start. The Public Transportation and Highway Improvement Act adds a second layer on top of city approvals: within set distances of the highway, specified activities may not be carried on without a permit from the Minister of Transportation, and those prohibitions apply despite other by-laws or authorities. The Act does not ask how big your project is. It asks what you are doing and how close it is to the highway.
Start with the activity — each has its own distance
The Act lists activities separately, under s.34 for a King's Highway and s.38 for a controlled-access highway, with distances along these lines (always confirm against the Act's text and with the MTO):
| Activity | Approximate control distance | Note |
|---|---|---|
| Erecting or altering a building, or grading land | Within 45 m of the highway limit | Covers specified works on the land |
| A new entranceway or private road to the highway | No distance carve-out | The entrance itself requires a permit |
| Signs | Within 400 m of the highway limit | The rule highway-facing signs most often trip |
| Uses that draw large crowds | Within 800 m of the highway limit | Assembly and event-type uses |
| Intersection areas | Measured from the intersection centre point — about 180 m for a King's Highway, about 395 m for a controlled-access highway | Corner parcels need this extra check |
Measurement matters: distances generally run from the highway limit, and the intersection rings from a defined centre point. A few metres can flip the answer, so have distances measured against the Act's definitions — never rely on a listing's "approximate" figures. And confirm with the MTO whether the road beside you is a provincial highway at all, and of which class; neighbouring parcels can fall on different sides of the line.
An MTO permit and a city approval are two different things
The classic failure is starting work on the strength of a municipal building permit alone. The Act's position is firm: inside a control distance, without the Minister's permit the activity is prohibited, and a city approval does not stand in for it. Run the two tracks in parallel — zoning and site plan at the city; building location, entrances, signs and use permits at the MTO. Whichever is missing, that part of the work cannot proceed.
For deals, this is a condition-drafting point. A buyer's planned sign location, a tenant's second entrance, an expansion wing — if any of them falls inside a control distance, the MTO permit belongs in the conditions or the pre-signing verification list. In leases, state expressly whose job the permit is and what happens to the lease if it is refused.
An invented example: a motel on a provincial highway wants a tall new sign facing the road. The city has no issue with its sign permit, but the sign site is within 400 metres of the highway limit — without the MTO permit, the sign cannot go up. Entrances are stricter still: if a proposed new entrance could never be approved, the commercial value of the whole parcel has to be re-thought.
Three misunderstandings I hear most often
"The city approved it, so the province won't care." The Act states its prohibitions apply despite other authorities. City approval settles the city layer; the MTO permit is a separate layer, and both are needed.
"The sign is on my own land — I'm not using the highway." The sign control distance is 400 metres, measured from the highway limit and concerned with visibility to the highway. Your own land can sit well inside the ring.
"The building and driveway have been here for decades, so an expansion is fine." Existing lawful status and new work are different questions. New construction, alterations and new entrances are typically the fresh acts that trigger the permit requirement; history does not bless new work.
My checklist for highway-adjacent property
- Confirm with the MTO whether the adjoining road is a provincial highway, and whether it is a King's Highway or a controlled-access highway.
- List every planned activity separately — building or alteration, entrance, sign, use, planting and utility lines — and test each against its distance.
- Have distances measured on the Act's definitions (highway limit, intersection centre point) and keep the measurement on file.
- For anything inside a control distance, run the MTO permit in parallel with municipal approvals and write it into the deal's conditions and timetable.
- Before closing, verify the paper: do the existing entrances and signs have their permits on file? Missing documents go on the due diligence list.
Trust Professional, Diligent Work. I am Ming Ren. On commercial land near a provincial highway, we settle the activity list and the distances first — then we talk about what the land can do and what it is worth.
This article is general information only, not legal advice. Highway class, measurement rules and your facts affect the conclusion. Verify with the MTO and consult an Ontario lawyer before acting.
Primary source: Public Transportation and Highway Improvement Act, R.S.O. 1990, c. P.50, ss.34, 36, 38 (Ontario e-Laws, consulted November 2026). The motel sign example is illustrative only.


