I am Ming Ren, a Broker with RE/MAX Realtron.
The plain conclusion first: a lead service line is not a reason to panic, but it is a reason to test. The order of operations never changes — check the home's age, identify the pipe material, then let a water test settle the question. Toronto runs free lead testing and a priority replacement program: the City replaces its side, you replace yours, and replacing both sides is the only complete fix.
1. Where the lead is, and which homes are at risk
The water service line is the pipe that brings water from the municipal main in the street into your home. It is split at the property line: the section from the watermain to the property line belongs to the City, and the section from the property line into the house belongs to the homeowner. When replacement costs money, that line decides who pays.
According to the City of Toronto, lead pipes mainly affect homes built before the mid-1950s, when drinking-water pipes were commonly made of lead. But treat age as a screen, not a verdict: even where the service line itself is not lead, older lead solder and brass fittings inside the home can also contribute lead. Only identification and testing close the question.
For a first look, find the pipe in the basement, on the section before the water meter. Lead is dull grey and relatively soft; scratch it lightly with a coin or a key and it shows shiny silver metal, and a magnet will not stick to it. By contrast, galvanized steel is magnetic, and copper scratches to a reddish colour. If you are not sure, stop there — have an inspector or a licensed plumber confirm it, because a wrong identification skews every decision after it.
2. The standard, and the test that actually counts
In March 2019, Health Canada tightened the maximum acceptable concentration (MAC) for lead in drinking water from 0.01 mg/L to 0.005 mg/L, sampled at the tap using the protocol for the type of building. Health Canada is equally clear that science cannot identify a level below which lead has no effect, so levels should be kept as low as reasonably achievable. Infants, young children and pregnant people are the most sensitive — if that is your household, put this item at the top of the inspection list.
A water test is the hardest evidence in this whole file; looking at the pipe a hundred times is worth less than one proper sample. Toronto offers free lead testing for residents — contact 311 for how to submit a sample. If the result comes back above 0.005 mg/L, bridge the gap with a filter certified to NSF/ANSI 53 for lead reduction and by running the tap before use, but understand what that is: a bridge. Replacement is the fix.
One point buyers miss: replacing only one side may not finish the job. If the City's side is new but your private side is still lead, the water still travels through lead on its way in — and the disturbance of partial replacement work can temporarily raise lead levels. Plan on both sides being done.
3. How Toronto's priority replacement program works
Toronto's Priority Lead Water Service Replacement Program is built around the ownership split:
| Section | Owner | Who pays to replace it |
|---|---|---|
| Watermain in the street → property line | City of Toronto | The City, on a priority basis under the program |
| Property line → into the home | Homeowner | The homeowner, through their own contractor |
There are two routes. You can arrange for the City's contractor to replace your side and the City's side at the same time, paying only for your portion. Or you can hire your own contractor to replace the private side first, then apply — with a contractor's or licensed plumber's invoice, or a home inspector's report confirming the private side is no longer lead — and the City will replace its side on a priority basis. Under the City's published process, once an application is approved the City aims to replace its portion within about 12 weeks. Not sure whether City records already flag an address as lead? Call 311 and ask staff to check.
An invented example to show how this plays in a negotiation (illustrative figures only): the inspection test comes back over the limit, and a contractor quotes $4,800 to replace the private side. With the lab report in hand, the buyer can ask the seller to replace it before closing, or to take $4,800 plus an allowance for the disruption off the price. That is not a bargaining script — it is a documented cost.
Three misunderstandings I hear most often
"The water looks clear and tastes fine, so there is no lead." Lead dissolved in water is colourless and tasteless. The only result that counts is a properly taken sample sent to a lab.
"The City replaced the street side, so my home is lead-free now." Only the public side was changed. If your private side is still lead, the water passes through lead before it reaches your tap. Both sides replaced is what "done" means.
"A home from the 1960s or 70s can't have this problem." Toronto's own guidance puts lead service pipes mainly in pre-mid-1950s homes, but lead solder and brass fittings in later homes can still add lead. A later build date is not an exemption from testing — and one test is cheap certainty.
If you are looking at an older Toronto home, do these five things in order
- Check the build year first. For a pre-mid-1950s Toronto home, put "identify the service line and test for lead" on the inspection list automatically.
- On the showing, look at the pipe before the water meter in the basement: colour, softness, a scratch test and a magnet give you a first read — and take a photo.
- Inside the condition period, use Toronto's free lead testing or have your inspector send a sample to an accredited lab, and read the result against the 0.005 mg/L line.
- If it is lead, negotiate from a contractor's written quote: seller replaces before closing, or the price reflects the quote — and build the City's priority program timeline into your plan.
- If infants, young children or a pregnancy are in the picture, install an NSF/ANSI 53 certified lead filter after closing and keep using it until both sides are replaced and a retest comes back clean.
Trust Professional, Diligent Work. I am Ming Ren. If an older home's water line has you unsure, bring the build year, a photo of the pipe and the test report, and we will go through the numbers and the paperwork, item by item.
This article is general information only, not legal advice and not health advice. Testing protocols, program eligibility and construction scheduling are matters for the City of Toronto, Toronto Public Health and a licensed plumber, in writing.
Primary sources: Health Canada, Guidelines for Canadian Drinking Water Quality — Lead (March 2019: MAC 0.005 mg/L, sampled at the tap; lead levels to be kept as low as reasonably achievable); City of Toronto, Priority Lead Water Service Replacement Program (toronto.ca: lead pipes mainly in homes built before the mid-1950s; the homeowner replaces the private side and may apply for priority replacement of the City side; records checks and free testing via 311 — consulted November 2026). The $4,800 figure is illustrative only, not a real quote.
Frequently asked questions
The water looks clear and tastes fine, so there is no lead, right?
Lead dissolved in water is colourless and tasteless. The only result that counts is a properly taken sample sent to a lab.
The City replaced the street side, so is my home lead-free now?
Only the public side was changed. If your private side is still lead, the water passes through lead before it reaches your tap; both sides replaced is what done means.
Can a home from the 1960s or 70s have this problem?
Toronto's own guidance puts lead service pipes mainly in pre-mid-1950s homes, but lead solder and brass fittings in later homes can still add lead. A later build date is not an exemption from testing.


